Re: [CAD_CAM_EDM_DRO] Re: plasma cutter

Don't even go there!! You are talking LETHAL voltages & currents. You'll
need a juicy-sized transformer (variable, or with taps), a high frequency
generator to generate the initial plasma arc, a sensor to transfer over to
"main-arc", an airjet controller, etc, etc. You just can't build one of
these cheaper than buying one. I bought an ESAB that'll cut 7/8" steel,
and sever 1.25" for about $1800.00. I plan to build a CNC gantry for it to
cut 60" x 120" sheet stock.

Best regards, Ray H

----------

> From: skronaldd <skronaldd@...>
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Re: plasma cutter
> Date: Saturday, January 12, 2002 11:43 AM
>
> --- In CAD_CAM_EDM_DRO@y..., "turksfixit" <turksfixit@h...> wrote:
> > Has anyone built a plasma cutter. Not the cnc part but the plasma
> > cuter part. It seems like it should be some what just an
> electrical
> > projet. However I can't seem to find much about the interals of a
> > plasma cutter. Any ideas or links would be nice. Thanks Turk
>
>
> I am allso looking for some INFO on making a plasma cutter
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

>