oh Moderator... Re: stepper controller boards
Posted by
dave_ace_me
on 2002-01-18 18:38:06 UTC
It seems there is a question as to the propriety of posting some
pictures. (scroll down)
Although it was a nice geusture, it may not be proper if
the copywright owner did not approve.
I think you might take them off line until there is
an approval so that no one gets into any trouble.
Lets keep the list free from any headaches.
I really do appreciate all the responses, but I
don't want to see anyone get into any trouble.
Dave
pictures. (scroll down)
Although it was a nice geusture, it may not be proper if
the copywright owner did not approve.
I think you might take them off line until there is
an approval so that no one gets into any trouble.
Lets keep the list free from any headaches.
I really do appreciate all the responses, but I
don't want to see anyone get into any trouble.
Dave
--- In CAD_CAM_EDM_DRO@y..., "cncdxf" <cncdxf@a...> wrote:
> San,
> Those drawing are Copyrighted material! The author is a
> friend of mine. He has been notified!
>
> Bob
>
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "santorelli333" <san3@s...> wrote:
> > Just upploaded pictures of a complete stepper driver cirquit to
the
> > photo album"Stepper driver circuits" it is a 3 axis but since the
> > single axis drive schematic is included and this is the same for
> all
> > 3 axis you can just ad one more to the circuit and the
transistors
> > are good for up to 5 amps each so you could connect 2 pc-power
> > supplies in paralell if you need more amps (if you need even
more,
> > replacing the transistors should be an easy undertaking)
> >
> > San
Discussion Thread
dave_ace_me
2002-01-18 16:07:11 UTC
stepper controller boards
Carol & Jerry Jankura
2002-01-18 16:17:55 UTC
RE: [CAD_CAM_EDM_DRO] stepper controller boards
DRigotti@A...
2002-01-18 16:30:47 UTC
Re: [CAD_CAM_EDM_DRO] stepper controller boards
Chris L
2002-01-18 16:43:37 UTC
Re: [CAD_CAM_EDM_DRO] stepper controller boards
santorelli333
2002-01-18 16:44:14 UTC
Re: stepper controller boards
cncdxf
2002-01-18 17:15:07 UTC
Re: stepper controller boards
Alan Marconett KM6VV
2002-01-18 17:57:14 UTC
Re: [CAD_CAM_EDM_DRO] stepper controller boards
Alan Marconett KM6VV
2002-01-18 18:28:40 UTC
Re: stepper controller boards
dave_ace_me
2002-01-18 18:38:06 UTC
oh Moderator... Re: stepper controller boards
dave_ace_me
2002-01-18 18:42:20 UTC
Re: stepper controller boards
Gary Wheeler
2002-01-19 14:13:25 UTC
Re: stepper controller boards
Area51tats@a...
2002-01-19 15:14:12 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Edwin S. Katz
2002-01-20 12:38:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Smoke
2002-01-20 12:54:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Jerry Kimberlin
2002-01-20 17:02:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Daniel J. Statman
2002-01-20 17:12:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Edwin S. Katz
2002-01-20 18:17:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Jerry Kimberlin
2002-01-20 18:36:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
dave_ace_me
2002-01-20 19:27:02 UTC
(rant) should be titanium was Re: stepper controller boards
wanliker@a...
2002-01-20 20:35:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards
Edwin S. Katz
2002-01-21 06:07:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper controller boards