Re: stepper controller boards

John K. removed the free stuff from his board about a week or two ago. Am
not sure he would give permission for its use now.

See: http://www.geocities.com/crankorgan/QandA.htm for a humorous dialog,
and why he pulled the free stuff.

I purchased one of his plans, but have to confess I used some of the free
pictures he had posted to scan a PC board layout into cad and build it the
stepper controller board. My appologies to John. That machine is now up
and running, although I'm having trouble with the Master5CNC crashing. May
have to reinstall, as it will move the motors, but crashes when loading a
file.

Gary M. Wheeler, AIA, architect
Modesto, California
Home page: http://g.wheeler.home.att.net
Ebay: g.wheeler@...

----- Original Message -----
>From: "dave_ace_me" <davemucha@...>
>Subject: Hi Bob,
>
>I figure that it is better to be sa[f]e than sorry.
>So I posted a note to the moderator to pull the pictures
>until we get approval.
>
>Although I have seen these published on a web page
>well, at least the schematic.
>
>Let's get an approval to post them with full
>credit to the author and/or post his web page
>so he can get the credit he deserves !
>...