Re: more thoughts on torch height
Posted by
mariss92705
on 2002-01-20 19:40:42 UTC
Dale,
I've got the circuit worked out; voltage in, step and direction out
with hysterisis . It takes a quad comparator (LM339), a dozen
resistors and two caps; about $1.50 in parts at Radio Shack prices.
It would be very helpful to know what voltage you want to servo to.
When I have that, I can scale the input resistors and post the
diagram.
Mariss
I've got the circuit worked out; voltage in, step and direction out
with hysterisis . It takes a quad comparator (LM339), a dozen
resistors and two caps; about $1.50 in parts at Radio Shack prices.
It would be very helpful to know what voltage you want to servo to.
When I have that, I can scale the input resistors and post the
diagram.
Mariss
--- In CAD_CAM_EDM_DRO@y..., "aspaguy" <spaguy@l...> wrote:
> The following is an exerpt from a shopbot page about upgrades.
> perhaps it will be of help. They seem to be using the same z axis
for
> torch height control. I have e-mailed them for more info, but don't
> know what to expect as a non shopbot owner.
> Thanks,
>
Dale
Discussion Thread
aspaguy
2002-01-20 14:15:37 UTC
more thoughts on torch height
mariss92705
2002-01-20 14:28:23 UTC
Re: more thoughts on torch height
aspaguy
2002-01-20 16:40:07 UTC
Re: more thoughts on torch height
mariss92705
2002-01-20 19:40:42 UTC
Re: more thoughts on torch height
aspaguy
2002-01-20 22:13:06 UTC
Re: more thoughts on torch height
aspaguy
2002-01-20 23:22:14 UTC
Re: more thoughts on torch height
Alan Marconett KM6VV
2002-01-21 11:09:34 UTC
Re: more thoughts on torch height