Re: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91?

woodknack,

G90 moves are all referenced from your machine 0,0 point set when you homed
your system or when you did a G92.

G91 moves are incremental from your current position.

Bob Campbell

----- Original Message -----
From: "woodknack" <wjdupont@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, January 21, 2002 10:07 AM
Subject: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91?


> What is the difference between G90 which is absolute mode and G91
> which is incremental mode. Can someone break down what absolute mode
> and incremental mode is. Its probably very simple, Im just very new
> to this.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>