CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] When to use What

Posted by Jon Elson
on 2002-01-21 23:20:23 UTC
Carol & Jerry Jankura wrote:

> Guys:
>
> When should you use the G54-g59.3 series of commands or the G92 command to
> change the location of (0,0,0)?

If you build a workholding fixture that holds several identical parts at some

fixed separation, you can use these offsets to select which part is to be
machined from the same program. If you have identical features like slots
or pockets that need intricate machining, you can create the CNC program
for one of these, and then offset with the G54, etc. to machine each
repetition of the feature.

Jon

Discussion Thread

woodknack 2002-01-21 08:07:37 UTC DIFFERENCE BETWEEN G90 & G91? Daniel J. Statman 2002-01-21 08:33:52 UTC Re: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91? Bob Campbell 2002-01-21 08:34:20 UTC Re: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91? Michael Milligan 2002-01-21 09:02:50 UTC RE: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91? Alan Marconett KM6VV 2002-01-21 11:50:01 UTC Re: [CAD_CAM_EDM_DRO] DIFFERENCE BETWEEN G90 & G91? yethdear0 2002-01-21 16:48:13 UTC Re: DIFFERENCE BETWEEN G90 & G91? Fitch R. Williams 2002-01-21 17:01:56 UTC Re: [CAD_CAM_EDM_DRO] Re: DIFFERENCE BETWEEN G90 & G91? woodknack 2002-01-21 17:22:18 UTC Re: DIFFERENCE BETWEEN G90 & G91? imserv1 2002-01-21 17:28:39 UTC Re: DIFFERENCE BETWEEN G90 & G91? Carol & Jerry Jankura 2002-01-21 18:23:32 UTC When to use What Jon Elson 2002-01-21 23:20:23 UTC Re: [CAD_CAM_EDM_DRO] When to use What yethdear0 2002-01-22 04:19:30 UTC Re: When to use What ballendo 2002-01-22 07:19:27 UTC safety blocks was Re: DIFFERENCE BETWEEN G90 & G91? ballendo 2002-01-22 07:24:08 UTC safety blocks Re: DIFFERENCE BETWEEN G90 & G91? Gail & Bryan Harries 2002-01-22 07:40:19 UTC RE: [CAD_CAM_EDM_DRO] safety blocks Re: DIFFERENCE BETWEEN G90 & G91? ballendo 2002-01-22 07:42:49 UTC Re: When to use What imserv1 2002-01-22 08:35:31 UTC safety blocks Re: DIFFERENCE BETWEEN G90 & G91?