Re: G02 Rx

Hi Alan,

"You need the CAD/CAM version of Vector. Open up a "new" drawing,
then special insert N/C, then on the NC screen, file import the NC
file. Then special backplot after selecting the lines of the file in
the window. Now you can "paste" it into the new drawing."

That's a very useful feature that VectorCADCAM has, but (sigh..)
that's another USD200. I vaguely remember some post mentioning
Predator G-code editor. Went to the website, didn't see any link for
a demo download. Any hope in this direction?

> Then special backplot after selecting the lines of the file in the
> window. Now you can "paste" it into the new drawing.
>
> HTH
>
> Alan KM6VV
>
>
> cadcamcenter wrote:
> >
> > Hi,
> >
> > What hobby class CAM/controller with program support G02/03 Rx

rather

> > than the more widespread G02/03 Ix Jy?
> >
> > Can VectorCAD 9.3 display NC program with G02/03 Rx? I managed to
> > open an NC program with blocks containing G02/03 Rx from the menu

bar

> > File>Open>.... The graphic displaced shows a series of straight
> > lines, didn't see any arc. Is there another way to open NC program
> > with VectorCAD that I do not know of?
> >
> > Many thanks
> >
> > Peter