Re: [CAD_CAM_EDM_DRO] G02 Rx
Posted by
Alan Marconett KM6VV
on 2002-01-27 12:07:12 UTC
Hi Peter,
You need the CAD/CAM version of Vector. Open up a "new" drawing, then
special insert N/C, then on the NC screen, file import the NC file.
Then special backplot after selecting the lines of the file in the
window. Now you can "paste" it into the new drawing.
HTH
Alan KM6VV
cadcamcenter wrote:
You need the CAD/CAM version of Vector. Open up a "new" drawing, then
special insert N/C, then on the NC screen, file import the NC file.
Then special backplot after selecting the lines of the file in the
window. Now you can "paste" it into the new drawing.
HTH
Alan KM6VV
cadcamcenter wrote:
>
> Hi,
>
> What hobby class CAM/controller with program support G02/03 Rx rather
> than the more widespread G02/03 Ix Jy?
>
> Can VectorCAD 9.3 display NC program with G02/03 Rx? I managed to
> open an NC program with blocks containing G02/03 Rx from the menu bar
> File>Open>.... The graphic displaced shows a series of straight
> lines, didn't see any arc. Is there another way to open NC program
> with VectorCAD that I do not know of?
>
> Many thanks
>
> Peter
Discussion Thread
cadcamcenter
2002-01-27 03:57:32 UTC
G02 Rx
Alan Marconett KM6VV
2002-01-27 12:07:12 UTC
Re: [CAD_CAM_EDM_DRO] G02 Rx
cadcamcenter
2002-01-27 13:09:20 UTC
Re: G02 Rx
Jon Elson
2002-01-27 13:46:18 UTC
Re: [CAD_CAM_EDM_DRO] G02 Rx
imserv1
2002-01-27 18:29:48 UTC
Re: G02 Rx