RE: [CAD_CAM_EDM_DRO] Free Surfcam

I was able to edit a post file trial and error that made the generated code
work ok. Andy

-----Original Message-----
From: Doug Harrison [mailto:prototype@...]
Sent: Wednesday, January 30, 2002 6:50 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Free Surfcam

> Anybody got the free surfcam CD yet and run it?
> Any feed back good , bad etc
>
> John S.
>

A few days before it arrived I talked to the regional Surfcam rep.
Apparently, they (like Mastercam) won't supply the information the customer
needs to write posts. Thus, you have to pay them for this "service." I
chucked the disk in the garbage when it showed up.

I've used Surfcam and think it it good software. However, I avoid software
that requires $150/hr maintenance calls.

Doug



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/