CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Free Surfcam

Posted by Andy Olney
on 2002-01-30 21:34:04 UTC
Yes! - Works well for my shape burning machine. Will do an automatic lead in
and out and the code needs only a little tweaking to run it on my EMC based
oxy gas burn table. Andy

-----Original Message-----
From: stevenson_engineers [mailto:machines@...]
Sent: Wednesday, January 30, 2002 5:05 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Free Surfcam


Anybody got the free surfcam CD yet and run it?
Any feed back good , bad etc

John S.


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

stevenson_engineers 2002-01-30 17:05:21 UTC Free Surfcam Doug Harrison 2002-01-30 18:47:43 UTC Re: [CAD_CAM_EDM_DRO] Free Surfcam Chris L 2002-01-30 19:22:49 UTC Re: [CAD_CAM_EDM_DRO] Free Surfcam Andy Olney 2002-01-30 21:34:04 UTC RE: [CAD_CAM_EDM_DRO] Free Surfcam Andy Olney 2002-01-30 21:39:11 UTC RE: [CAD_CAM_EDM_DRO] Free Surfcam glee@i... 2002-01-30 21:55:58 UTC RE: [CAD_CAM_EDM_DRO] Free Surfcam Chris L 2002-01-31 17:40:39 UTC Re: [CAD_CAM_EDM_DRO] Free Surfcam