Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
Posted by
ccs@m...
on 2002-02-01 08:52:25 UTC
> But it all comes down to steps per. If they are microsteps, and thereMicrosteps are great for smoothing out motion, but should not be
> is enough power available to make each microstep "count", then
> steppers will work. Try thinking your tapers through, using step
> size. Then you will know the extent of any problem you may have. A
> microstepper will do some smoothing, a TRUE servo will do some also.
>
> But if you've got 2000 steps in diameter and 2 in the other dir, you
> are gonna see bumps,IMO. So it depends on what "shallow" taper
> means...
counted on to have even distribution. So if you really had only a few
steps over a long distance, you probably would see some waviness.
It's probably better to use a timing belt reduction to make the real
step size small, or best of all to use a servo system with a fine
encoder resolution - which will be more even and lets you put the
encoder on the screw, eliminating any inconsistency in the reduction
drive.
Chris Stratton
-------------------------------------------------
Christopher C. Stratton
Engineer, Instrument Maker, and Horn Player
ccs@... 617 628 1062
http://web.mit.edu/~stratton/www/brassbuild.html
Discussion Thread
Carlos Guillermo
2002-01-28 17:08:16 UTC
Lathe CNC retrofit
IMService
2002-01-29 07:27:18 UTC
Re: Lathe CNC retrofit
Smoke
2002-01-29 07:53:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
ballendo
2002-01-30 01:35:55 UTC
Re: Lathe CNC retrofit
Marcus & Eva
2002-01-30 08:32:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
ballendo
2002-01-30 08:50:43 UTC
Re: Lathe CNC retrofit
stevenson_engineers
2002-01-30 16:13:07 UTC
Re: Lathe CNC retrofit
Marcus & Eva
2002-01-30 21:03:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
Marcus & Eva
2002-01-30 21:34:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
stevenson_engineers
2002-01-31 00:59:04 UTC
Re: Lathe CNC retrofit
ballendo
2002-02-01 08:21:22 UTC
Re: Lathe CNC retrofit
ccs@m...
2002-02-01 08:52:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
Marcus & Eva
2002-02-01 18:51:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
Marcus & Eva
2002-02-01 19:07:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe CNC retrofit
ballendo
2002-02-01 19:24:46 UTC
Re: Lathe CNC retrofit