Re: [CAD_CAM_EDM_DRO] What does "KP" mean???

> Group,
>
> I'm looking at a German-made machine for a possible automation
> project. Part of the machine is hydraulicly actuated. The label on
> the hydraulic portion says 12000KP @ 10bar. (the "@" symbol was
> really a German word, but it's safe to assume the "@" meaning). It's
> an air over oil system so that label tells me that at an input air
> pressure of 147psi I get an output of 12000KP. I don't know what
> the 12000KP part means. For this label to mean anything other than a
> measure of pushing force would not make much sense on this particular
> machine.
>
> I don't find any conversions from "KP" to force. Any ideas what this
> means?
>
> thanks,
>
> Doug
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>