Re: Usefull Utility

--- In CAD_CAM_EDM_DRO@y..., Sven Peter <peteryco@r...> wrote:

>
> Hello ,
> it looks nice and is easy to handle. Are in the trade version
> the data for metric stuff like taps etc included?
> Cheers
> Sven Peter
> cncdxf wrote:

Sven,
I was told that V 4.0 in the pipeline will have metric taps sizes and
metric capscrews. Gears will follow.

John S.

> >
> > Hi John,
> > Thanks for sharing this with us. It is too bad some people
> > turn everything into a debate lately.
> >
> > Bob
> >
> > --- In CAD_CAM_EDM_DRO@y..., "stevenson_engineers" <machines@n...>
> > wrote:
> > > Hi guys,
> > > Found this very handy utility whils searching the web for info

on

> > > sprockets.
> > > It's called Machinist Mate, URL at bottom of post.
> > > As well as accurately drawing sprockets it does the ususal right
> > > angle triangle stuff, Speeds and feeds, compound angles, bolt
> > > circles, sine bar, chords of circles, bending allowances,

tapers,

> > > speeds and feeds, material calculator, tap drills and a nifty
> > utility
> > > to work out dovetails based on across roller measurements.
> > > I emailed the guy to see if he would be putting other stuff in

such

> > > as gears and user definable tables so you can enter your own
> > > information.
> > > Aparently that's in the pipeline.
> > > The demo is a full 30 day shareware use one with a $15

registration

> > > fee and free updates from then on.
> > > Usual no connection b******t but After using this for just over

a

> > day
> > > I sent my money off. If I can be parted from 15 bucks it MUST be
> > good
> > > [Grin}
> > > I know there is freeware out there but this is all in one

package

> > and
> > > it looks like the guy will update to suit users for a free

lifetime

> > > use.
> > >
> > > http://www.wadeproco.com
> > >
> > > John S.
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/