CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility

Posted by Sven Peter
on 2002-02-02 21:57:08 UTC
Hello ,
it looks nice and is easy to handle. Are in the trade version
the data for metric stuff like taps etc included?
Cheers
Sven Peter
cncdxf wrote:
>
> Hi John,
> Thanks for sharing this with us. It is too bad some people
> turn everything into a debate lately.
>
> Bob
>
> --- In CAD_CAM_EDM_DRO@y..., "stevenson_engineers" <machines@n...>
> wrote:
> > Hi guys,
> > Found this very handy utility whils searching the web for info on
> > sprockets.
> > It's called Machinist Mate, URL at bottom of post.
> > As well as accurately drawing sprockets it does the ususal right
> > angle triangle stuff, Speeds and feeds, compound angles, bolt
> > circles, sine bar, chords of circles, bending allowances, tapers,
> > speeds and feeds, material calculator, tap drills and a nifty
> utility
> > to work out dovetails based on across roller measurements.
> > I emailed the guy to see if he would be putting other stuff in such
> > as gears and user definable tables so you can enter your own
> > information.
> > Aparently that's in the pipeline.
> > The demo is a full 30 day shareware use one with a $15 registration
> > fee and free updates from then on.
> > Usual no connection b******t but After using this for just over a
> day
> > I sent my money off. If I can be parted from 15 bucks it MUST be
> good
> > [Grin}
> > I know there is freeware out there but this is all in one package
> and
> > it looks like the guy will update to suit users for a free lifetime
> > use.
> >
> > http://www.wadeproco.com
> >
> > John S.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

stevenson_engineers 2002-02-02 17:01:35 UTC Usefull Utility Smoke 2002-02-02 17:10:23 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility Monte Westlund 2002-02-02 17:26:58 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility stevenson_engineers 2002-02-02 17:44:59 UTC Re: Usefull Utility Smoke 2002-02-02 17:51:28 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility stevenson_engineers 2002-02-02 18:09:17 UTC Re: Usefull Utility Smoke 2002-02-02 18:58:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility Smoke 2002-02-02 19:07:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility cncdxf 2002-02-02 19:21:39 UTC Re: Usefull Utility Sven Peter 2002-02-02 21:57:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility stevenson_engineers 2002-02-03 02:16:47 UTC Re: Usefull Utility stevenson_engineers 2002-02-03 02:22:48 UTC Re: Usefull Utility stevenson_engineers 2002-02-03 02:40:13 UTC Re: Usefull Utility Sven Peter 2002-02-03 04:49:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility Smoke 2002-02-03 09:06:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility stevenson_engineers 2002-02-03 11:58:51 UTC Gears : was Re: Usefull Utility Raymond Heckert 2002-02-04 19:27:43 UTC Re: [CAD_CAM_EDM_DRO] Gears : was Re: Usefull Utility stevenson_engineers 2002-02-05 03:15:50 UTC Gears : was Re: Usefull Utility Monte Westlund 2002-02-05 06:41:24 UTC Re: [CAD_CAM_EDM_DRO] Gears : was Re: Usefull Utility