CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility

Posted by Smoke
on 2002-02-03 09:06:18 UTC
Yep! Looking at the page (again) right now.
For drawing one tooth profile I see the following dimensions:
D,A,B,E,V,M, T,W,F,H,S,xy,yz,ab
14 dimensions....still quite a few. Go buy the utility if YOU need it.

Recent circumstances have required me to redesign the standard gear tooth
profile.
I couldn't machine them using CNC because the face width was to wide and I
couldn't get an end mill in the required diameter with a cut length long
enough to do the job.
Once the first gear is drawn, all other gears have to be made individually,
because the pitch diameter doesn't not change at a linear rate. Now THAT
would be a lot of work if I had a large number of different sized gears to
develop.

I used the CAD program for the redesign work. I'll be testing the program
to cut the gears on the CNC MACHINE at school next week.

Smoke


> I've looked. I have even drawn them in the past. Have you looked
> closely?? Twenty two dimensions and variables PER TOOTH.
> Five cutters per range.
> God knows how many pitch sizes.
> Do the maths:-
> 22 x 5 x God = A hell of a lot of work.

Discussion Thread

stevenson_engineers 2002-02-02 17:01:35 UTC Usefull Utility Smoke 2002-02-02 17:10:23 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility Monte Westlund 2002-02-02 17:26:58 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility stevenson_engineers 2002-02-02 17:44:59 UTC Re: Usefull Utility Smoke 2002-02-02 17:51:28 UTC Re: [CAD_CAM_EDM_DRO] Usefull Utility stevenson_engineers 2002-02-02 18:09:17 UTC Re: Usefull Utility Smoke 2002-02-02 18:58:01 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility Smoke 2002-02-02 19:07:27 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility cncdxf 2002-02-02 19:21:39 UTC Re: Usefull Utility Sven Peter 2002-02-02 21:57:08 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility stevenson_engineers 2002-02-03 02:16:47 UTC Re: Usefull Utility stevenson_engineers 2002-02-03 02:22:48 UTC Re: Usefull Utility stevenson_engineers 2002-02-03 02:40:13 UTC Re: Usefull Utility Sven Peter 2002-02-03 04:49:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility Smoke 2002-02-03 09:06:18 UTC Re: [CAD_CAM_EDM_DRO] Re: Usefull Utility stevenson_engineers 2002-02-03 11:58:51 UTC Gears : was Re: Usefull Utility Raymond Heckert 2002-02-04 19:27:43 UTC Re: [CAD_CAM_EDM_DRO] Gears : was Re: Usefull Utility stevenson_engineers 2002-02-05 03:15:50 UTC Gears : was Re: Usefull Utility Monte Westlund 2002-02-05 06:41:24 UTC Re: [CAD_CAM_EDM_DRO] Gears : was Re: Usefull Utility