Re: [CAD_CAM_EDM_DRO] Re: WHAT IS WANTED IN A CONTROLER

Hi John

Just to add to Jon's comments below...

EMC will go much higher than just 120% if you set the relevent parameter. I
have 500% feed override on one setup that is used mainly for simulations.

EMC can be controlled with low level commands via it's Tcl extensions. Or if
you feel adventurous, with the use of purpose written C functions.
You can also define toolpaths using mathematical equations.....

Regards, Paul.

On Wednesday 13 February 2002 6:16 pm, Jon Elson wrote:

> EMC has feed hold (P for pause and S for resume) as well as number
> keys for 10 to 100% feed rate override, plus a slide bar for 0 - 120%
> feed rate with the mouse.

> > and it's own macro language.
>
> Well, EMC doesn't have a separate macro language for tool path creation,
> but