CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers

Posted by Paul
on 2002-02-15 14:13:13 UTC
Hi Mariss

This is a really useful bit of info -And yes, I do have some other unknown
motors of the newer square design. 4 wire size 23, about 75mm (3") long.
Comparing the numbers with some data sheets, the wattages tally pretty
closely. All I need to do now is to find a good milliohm meter.....
A visit to the local store and ask for a demo on real world components is in
order.....

Regards, Paul.


On Friday 15 February 2002 5:41 pm, mariss92705 wrote:
> Hi,
>
> Here's what I use for "mystery motors":
>
> size 23, 1 stack -- 5W
> size 23, 2 stack -- 8W
> size 23, 3 stack -- 10W
>
> size 34, 1 stack -- 8W
> size 34, 2 stack -- 12W
> size 34, 3 stack -- 14W
>
> This applies to 6-wire round motors. It does not apply to the
> new "square" motors, but being new, they probably are not mystery
> motors either.

Discussion Thread

Paul 2002-02-14 13:01:15 UTC Driving unmarked steppers mariss92705 2002-02-14 13:21:48 UTC Re: Driving unmarked steppers NCS 2002-02-14 14:17:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers Hugh Currin 2002-02-15 08:13:28 UTC Re: Driving unmarked steppers mariss92705 2002-02-15 09:41:51 UTC Re: Driving unmarked steppers Paul 2002-02-15 14:13:13 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers Hugh Currin 2002-02-15 15:01:34 UTC Re: Driving unmarked steppers mariss92705 2002-02-15 15:38:41 UTC Re: Driving unmarked steppers Les Watts 2002-02-15 16:03:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers ccs@m... 2002-02-15 17:06:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers Les Watts 2002-02-15 20:47:54 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers turbulatordude 2002-08-16 20:23:31 UTC Mariss's Mystery Motors ( was Re: Driving unmarked steppers turbulatordude 2002-08-16 20:33:40 UTC Re: Driving unmarked steppers mariss92705 2002-08-16 21:32:00 UTC Mariss's Mystery Motors ( was Re: Driving unmarked steppers rawen2 2002-08-17 09:16:47 UTC Mariss's Mystery Motors ( was Re: Driving unmarked steppers Alan Marconett KM6VV 2002-08-17 09:36:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Driving unmarked steppers