Re: DRO board - another question

Hello,

The link to the stips and encoder is:
http://www.encodertech.com/Data_Photos/OEM_cat_sheet.pdf

The encoder is a LM-25CPMM-3S that I have and I just asked for the
12CPMM scales to go with it. If I could find my invoice in my mess
errr filing system I'd let you know their part number for the scales.

The scales for their 720CPI head are only 3" long max.

TTYL, Jeff

PS I always got good responce time when I e-mailed them so if you
have questions they are pretty good that way. They also mentioned
that later this year they will have enclosed linears with the scale
and head as a unit. I didn't get an ETA on them other than later
this year.

--- In CAD_CAM_EDM_DRO@y..., "Carlos Guillermo" <carlos@v...> wrote:
> Hi Jeff -
>
> Do they have the info on their website? I can't find it.
>
> Carlos Guillermo
> VERVE Engineering & Design
>
> -----Original Message-----
> From: j_e_f_f_williams [mailto:jwilliams@d...]
> Sent: Friday, March 01, 2002 2:55 PM
> To: CAD_CAM_EDM_DRO@y...
> Subject: [CAD_CAM_EDM_DRO] Re: DRO board - another question
>
> Hello,
>
> www.encodertech.com has 0.01mm strips and reader heads which
> will
> give you just less than your 0.0005" resolution. The strips are a
> max length of 600mm. If you go to their WWW site it mentions a
> 12.5CPMM strip and a 12.5CPMM head. Well they also have a non-
> documented 25CPMM head that works with the 12.5CPMM strips. I
> have
> some at home and they work great (specially since I work in mm
> here
> in Canada) If you want more info let me know and I can tell you
> part
> numbers etc once I go home.
>
> Now if I can just find a good way of mounting them on my
> lathe.....
>
> TTYL, Jeff