Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Posted by
Jon Elson
on 2002-03-02 23:35:53 UTC
Ed Fanta wrote:
user interfaces can't be used. There is still the old keystick interface that
uses the plain "tty" terminal. You might be able to start Xwindows with the
command startx. You also need to be logged in as root, or with root privledges,
or have set all the parts of EMC to be able to have root privledges, as it
takes control of certain hardware in the system.
The bad image file emc.gif may be spurious, as that is the "splash screen",
but it can't be displayed without Xwindows, either.
Jon
> Application initialization failed: no display name and no $DISPLAYThis last line indicates you are not running Xwindows, so Xemc and TkEMC
> environment variable
> bad image file emc.gif
> starting EMC MOTION PROGRAM -- steppermod.o...done
> starting EMC IO PROGRAM -- minimillio...done
> simDioInit(emc.ini)
> starting EMC TASK PROGRAM -- minimilltask...done
> running EMC DISPLAY PROGRAM -- tkemc...
> Application initialization failed: no display name and no $DISPLAY
> environment variable
user interfaces can't be used. There is still the old keystick interface that
uses the plain "tty" terminal. You might be able to start Xwindows with the
command startx. You also need to be logged in as root, or with root privledges,
or have set all the parts of EMC to be able to have root privledges, as it
takes control of certain hardware in the system.
The bad image file emc.gif may be spurious, as that is the "splash screen",
but it can't be displayed without Xwindows, either.
Jon
Discussion Thread
Ed Fanta
2002-02-18 13:45:03 UTC
EMC Linux newby needs help
Paul
2002-02-18 14:22:34 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Bill Vance
2002-02-18 20:19:09 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Ed Fanta
2002-02-19 20:09:20 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Ed Fanta
2002-02-19 20:14:08 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Ed Fanta
2002-03-02 20:48:27 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Bill Vance
2002-03-02 22:19:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
Jon Elson
2002-03-02 23:35:53 UTC
Re: [CAD_CAM_EDM_DRO] EMC Linux newby needs help
rehenry
2002-03-03 15:55:02 UTC
Re: Re: EMC Linux newby needs help
Jon Elson
2002-03-03 17:54:45 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: EMC Linux newby needs help