CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Gluing aluminum

Posted by Sven Peter
on 2002-03-10 14:45:15 UTC
This sounds a great idea And somehow confirms a try I made long ago.
Sven Peter

catboat15@... wrote:
>
> In a message dated 3/8/2002 2:08:09 PM Pacific Standard Time,
> bruce@... writes:
>
> > glued and screw the frame together,
>
> Just a note about securing aluminum. You can soft solder aluminum with
> ordinary plumbers solder if you know how. The trick I learned long ago was
> take some of your wire solder and grind some with your Dremel grinder. The
> wheel bcomes loaded with solder of course. Then use that wheel to grind a
> spot on the aluminum. Vola! the alum becomes "tinned" with solder. and you
> can go ahead and solder things together. The secret is that solder will not
> stick to aluminum oxide and aluminum exposed to air oxidises almost
> instantly. By grinding with a solder loaded wheel the oxide is ground away,
> the heat melts some of the solder and it sticks to the raw aluminum before
> the oxide coat forms. I did not believe this till I tried it, but it does
> work.
>
> John Meacham
> California High Desert
> 12 inch Atlas, Minimill, rusty file
>
> [Non-text portions of this message have been removed]
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> http://www.metalworking.com/news_servers.html
> http://www.metalworking.com/news_servers.html
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Bruce Klawiter 2002-03-08 14:01:15 UTC Gluing aluminum Sven Peter 2002-03-08 17:14:18 UTC Re: [CAD_CAM_EDM_DRO] Gluing aluminum Guy Sirois 2002-03-09 11:32:20 UTC RE: [CAD_CAM_EDM_DRO] Gluing aluminum catboat15@a... 2002-03-09 22:18:29 UTC Re: [CAD_CAM_EDM_DRO] Gluing aluminum dfg1955 2002-03-10 13:00:22 UTC Re: Gluing aluminum Sven Peter 2002-03-10 14:45:15 UTC Re: [CAD_CAM_EDM_DRO] Gluing aluminum pcotto 2002-03-10 17:23:31 UTC Re: Gluing aluminum Brian 2002-03-10 18:46:13 UTC Re: [CAD_CAM_EDM_DRO] Gluing aluminum