Re: [CAD_CAM_EDM_DRO] UPS for computer on CNC lathe
Posted by
Les Newell
on 2002-03-19 11:38:53 UTC
Most computers will withstand a pretty severe power dip without crashing.
For safety your controller should be fitted with some sort of relay
arrangement so that you need to press a button before the computer can take
control of the machine. This should drop out in case of a mains failure so
the machine won't go AWOL when power returns.
Les
you have trouble.
subjects, that are not allowed on the CCED list.
For safety your controller should be fitted with some sort of relay
arrangement so that you need to press a button before the computer can take
control of the machine. This should drop out in case of a mains failure so
the machine won't go AWOL when power returns.
Les
> I have a CNC lathe for my home shop. It is 3 phase, but I haveaol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> seperated the single phase stuff from the 3 phase power from my
> rotary converter. The single phase runs the computer. Do I need to
> put the computer on a UPS system for protedtion during a power
> dip/loss? If I do not use a UPS what will happen if I am running and
> have a power outage?
>
> Thanks
>
> Scott Hamilton
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
you have trouble.
> http://www.metalworking.com/news_servers.htmlsite to the CCED group, as many of the same memembers are there, for OT
>
> http://www.jobshophomeshop@yahoogroups.com I consider this as a sister
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
fuddham
2002-03-19 08:24:14 UTC
UPS for computer on CNC lathe
Jon Elson
2002-03-19 09:51:38 UTC
Re: [CAD_CAM_EDM_DRO] UPS for computer on CNC lathe
Les Newell
2002-03-19 11:38:53 UTC
Re: [CAD_CAM_EDM_DRO] UPS for computer on CNC lathe
Stan Stocker
2002-03-19 18:27:12 UTC
Re: [CAD_CAM_EDM_DRO] UPS for computer on CNC lathe
Sven Peter
2002-03-20 05:41:54 UTC
Re: [CAD_CAM_EDM_DRO] UPS for computer on CNC lathe