RE: [CAD_CAM_EDM_DRO] Re: Why is my feedrate slow with stepper motor

What I like to do is just make a DOS boot floppy that has nothing in the
config.sys. Then you can boot to that and know that your system is as
clean as it can get. That is how I am currently using TruboCNC on my
Linux system for testing purposes.

Tim
[Denver CO]

> -----Original Message-----
> Start out with your config.sys file and comment out each
> line, one line at a time. Observe the waveshape to find what
> drivers are sucking time during the clock interrupt.
> EMM386.EXE is a good start. But, there may be others.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>

http://www.jobshophomeshop@yahoogroups.com I consider this as a sister
site to the CCED group, as many of the same memembers are there, for OT
subjects, that are not allowed on the CCED list.