CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Re: Jeff Davis' CNC Retro Question - Ball screws

Posted by Tim Goldstein
on 2002-04-06 21:12:12 UTC
> Did you have to
> anneal the end before machining and threading? Did you use carbide
> tooling in the lathe? Any grinding operations?

My experience with the 5/8" stock from McMaster Carr is don't try to
anneal it. I tried and the material seems to be air hardening. I have
turned the ball screw stock in as received condition on my Shoptask with
carbide insert tooling. You have to take a mighty deep cut that goes all
the way under the hardened skin taking it down below the root of the
thread in one pass. If you take any less you will be breaking inserts.

Tim
[Denver, CO]

Discussion Thread

Peter 2002-04-05 17:23:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Jeff Davis' CNC Retro Question - Ball screws Tim Goldstein 2002-04-06 21:12:12 UTC RE: [CAD_CAM_EDM_DRO] Re: Jeff Davis' CNC Retro Question - Ball screws batwings@i... 2002-04-07 05:22:50 UTC Ball screws