CAD CAM EDM DRO - Yahoo Group Archive

Re: Older Bridgeport DRO help needed!

Posted by mfea_2000
on 2002-04-09 18:11:45 UTC
--- In CAD_CAM_EDM_DRO@y..., Paul Amaranth <paul@a...> wrote:
> On Tue, Apr 09, 2002 at 06:01:45AM +0000, Jon Elson wrote:
> > mhead28 wrote:
> >
> > > I have an older Bridgeport thextron 1810122 DRO head unit that
> > > appears to be in good working condition. The rear has 6 pin
military
> > > type connectors on it for the scales. Does anyone know the
pinouts of
> > > these?
> > >
> > > I have some gurley/teledyne linear scales (8780,8770) that I
would
> > > like to use with it. THey have plastic connectors that are
using 7
> > > pins. I assume the bridgeport uses the metal housing as the
shield. I
> > > need to figure out how to connect the 2. I found out from
gurley that
> > > the scales use:
> > >
> > > Pin 1 + 5VDC Red
> > > Pin 3 + 8VDC Blue
> > > Pin 5 Sine output Green
> > > Pin 6 Cosine Output Yellow
> > > Pin 10 Reference Zero White
> > > Pin 12 Ground Black
> > > Pin 14 Shield
> >
> > Depending on the date, sometime around 1970, all the US makers
switched
> > to metric scales, and put mm -> inch conversion in their readout
boxes.
> > So, you can't cross that bridge, in general. So, make sure both
your old
> > scales and the new ones read out in the same units.
> >
> > Second, these labels sound like these Teledyne/Gurley might be
analog scales,
> > rather than logic signals. That could be a big problem.
> >
> > Jon
> >
>
> I think they used a preamp board in their readout that converted
> the sin/cos scale output to digital.
>
> Paul
>
Which company are you talking about? Teledyne or Textron?

Tim

Discussion Thread

mhead28 2002-04-08 16:24:22 UTC Older Bridgeport DRO help needed! Jon Elson 2002-04-08 22:50:37 UTC Re: [CAD_CAM_EDM_DRO] Older Bridgeport DRO help needed! Paul Amaranth 2002-04-09 05:52:35 UTC Re: [CAD_CAM_EDM_DRO] Older Bridgeport DRO help needed! mfea_2000 2002-04-09 09:52:02 UTC Re: Older Bridgeport DRO help needed! mfea_2000 2002-04-09 18:11:45 UTC Re: Older Bridgeport DRO help needed!