CAD CAM EDM DRO - Yahoo Group Archive

Re: Pardon my dust (collection)

Posted by ballendo
on 2002-04-19 06:33:14 UTC
Dave,

Think you could supply the "rest" of the details on these two systems
and post in the files section. I, for one, think this would be a nice
bit of info to have available...

Thank you for sharing an interesting approach to dealing with the
dust of our CNC machines,

Ballendo

--- In CAD_CAM_EDM_DRO@y..., "dave_ace_me" <davemucha@j...> wrote:
> The idea of the scrubber tower, a 6 ft tall 6 inch dia PVC pipe
with multiple sprinkler heads is to let the air flow with dust, and
let <snip>

And
>
> A second method of catching fine dust is a filled scrubber stack.
> this could be a stack filled with ping-pong balls and a sprinkler
> feeding a lot of water flowing over them. The huge surface area is
> the method of collection.
>
> Neither of these methods is expensive, you should be able to put
one
> in your shop for less than $100.00, less if you can salvage some
> parts. What you are collecting is MOST of the dust in the air.

Discussion Thread

Raymond Heckert 2002-04-16 17:01:07 UTC Re: Pardon my dust Jon Elson 2002-04-16 23:05:05 UTC Re: [CAD_CAM_EDM_DRO] Re: Pardon my dust ballendo 2002-04-17 02:52:21 UTC Re: Pardon my dust dave_ace_me 2002-04-17 07:59:53 UTC Re: Pardon my dust (collection) Jon Elson 2002-04-17 21:51:57 UTC Re: [CAD_CAM_EDM_DRO] Re: Pardon my dust Raymond Heckert 2002-04-18 09:51:36 UTC Re: [CAD_CAM_EDM_DRO] Re: Pardon my dust ballendo 2002-04-19 06:33:14 UTC Re: Pardon my dust (collection)