CAD CAM EDM DRO - Yahoo Group Archive

Re: XL timing belts or substitute

Posted by billm37
on 2002-04-29 14:51:21 UTC
--- In CAD_CAM_EDM_DRO@y..., Art Eckstein <axtein@d...> wrote:
> Bill,
> Looking in my Dayco catalogue that I keep at my side, I find the
> Synchro-Cog belts in 5mm pitch (which is close to the XL) in
lengths up to
> 99.4 inches. The closes to the 96" IS the 99.4" and the next step
down is 88.6"
>
> That works out to 505 teeth for the 99.4" belt.
>
> Hope this helps.
>


It did indeed... Apparently it is just Gates (the line that Motion
Industries carries)that only goes to 77" Sent a request to SDP for a
quote..

Thanks

Bill

Discussion Thread

billm37 2002-04-29 13:17:07 UTC XL timing belts or substitute buchpa 2002-04-29 13:51:19 UTC Re: XL timing belts or substitute Art Eckstein 2002-04-29 13:56:32 UTC Re: [CAD_CAM_EDM_DRO] XL timing belts or substitute Les Newell 2002-04-29 14:45:36 UTC Re: [CAD_CAM_EDM_DRO] XL timing belts or substitute billm37 2002-04-29 14:51:21 UTC Re: XL timing belts or substitute dumbdrive 2002-04-29 16:25:13 UTC Re: XL timing belts or substitute Art Eckstein 2002-04-29 16:27:49 UTC Re: [CAD_CAM_EDM_DRO] Re: XL timing belts or substitute batwings@i... 2002-04-29 16:41:29 UTC Re: [CAD_CAM_EDM_DRO] XL timing belts or substitute John H. Berg 2002-05-03 08:50:24 UTC Re: [CAD_CAM_EDM_DRO] XL timing belts or substitute