Re: [CAD_CAM_EDM_DRO] Re: XL timing belts or substitute

Yes, they only carry 77" in the 1/5" (0.20), but this is metric and a
different line. But it gets you past the 77" limit and if you haven't
bought the pulleys, no big deal!


At 09:49 PM 4/29/02 +0000, you wrote:

>--- In CAD_CAM_EDM_DRO@y..., Art Eckstein <axtein@d...> wrote:
> > Bill,
> > Looking in my Dayco catalogue that I keep at my side, I find the
> > Synchro-Cog belts in 5mm pitch (which is close to the XL) in
>lengths up to
> > 99.4 inches. The closes to the 96" IS the 99.4" and the next step
>down is 88.6"
> >
> > That works out to 505 teeth for the 99.4" belt.
> >
> > Hope this helps.
> >
>
>
>It did indeed... Apparently it is just Gates (the line that Motion
>Industries carries)that only goes to 77" Sent a request to SDP for a
>quote..
>
>Thanks
>
>Bill
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects
>goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to
>reach it if you have trouble.
>http://www.metalworking.com/news_servers.html
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this as a
>sister site to the CCED group, as many of the same members are there, for
>OT subjects, that are not allowed on the CCED list.
>
>
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Bubba

OLDER THAN DIRT
Country Bubba
(Actually the inventor of Country and Bubba)

axtein@...
LaGrange, GA

http://members.dicomm.net/~axtein


[Non-text portions of this message have been removed]