re:: Re: CAD CAM Controller software
Posted by
Elliot Burke
on 2002-05-05 18:22:47 UTC
John S. writes:
about exporting from CAD programs into Dophin?
SW exports solids as IGES, STEP, and a few other formats. The DXF exports
are flat, and contain no Z information.
I really don't want to recreate my geometry in AutoCAD.
Thanks.
Elliot
>If you are happy using Autocad 2000 that fine. With Dolphin you have.......
>a choice. You can import into the CAD side as a dxf file and specify
>which of the shapes need to be your toolpath, or you can draw the
>shape you need for the toolpath and import that straight into the
>CAM system.
>So far I've taught four people on this list who used another low costSeveral years ago I changed from AC to SolidWorks. Do you know anything
>program how to program in Dolphin. All four have found it far easier
>and dropped the other program.
about exporting from CAD programs into Dophin?
SW exports solids as IGES, STEP, and a few other formats. The DXF exports
are flat, and contain no Z information.
I really don't want to recreate my geometry in AutoCAD.
Thanks.
Elliot
Discussion Thread
Elliot Burke
2002-05-05 18:22:47 UTC
re:: Re: CAD CAM Controller software
follicely_challenged
2002-05-05 23:50:16 UTC
re:: Re: CAD CAM Controller software
follicely_challenged
2002-05-05 23:51:03 UTC
re:: Re: CAD CAM Controller software
stevenson_engineers
2002-05-06 03:05:30 UTC
re:: Re: CAD CAM Controller software
Marcus & Eva
2002-05-06 08:22:43 UTC
Re: [CAD_CAM_EDM_DRO] re:: Re: CAD CAM Controller software
scott wilson
2002-05-06 08:47:06 UTC
Re: [CAD_CAM_EDM_DRO] re:: Re: CAD CAM Controller software
Tim Goldstein
2002-05-06 08:58:14 UTC
Re: [CAD_CAM_EDM_DRO] re:: Re: CAD CAM Controller software