CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC

Posted by John
on 2002-05-30 19:44:45 UTC
That's an excellent pattern, is that how it looked straight off the machine
or has it had some deburring? The edges look nice and clean. Also, I saw
your page a while back and was wondering how you inalyed the gold into your
rings. Are channels cut, then gold soft soldered as liquid into them and the
surface cleaned by removing a few fractions on the lathe? Will you use some
sort of mask to only anodise the inlay? I'm not some sneeky jewellers trying
to have off with your ways, just interested into how you do it.

Regards,
Little John H.



> Check out my latest piece at:
>
> http://members.rennlist.com/statmandesigns/CK008-Pair-Small.JPG
>
> Each pattern is milled with a 2-flute ballnose endmill. The larger ring
was
> milled with a 0.020" endmill to a depth of 0.018" in three 0.006" passes.
> The smaller ring was milled with a 0.015" endmill to a depth of 0.015" in
> three 0.005" passes. I have the high speed spindle pulley set on my
> Sherline mill and these were cut at the maximum spindle speed of 10,200
RPM.
> It took about 4 hours of mill time to cut each ring. And I broke one
0.015"
> cutter.
>
> These rings are unfinished and will be anodized or enameled in the carving
> to increase the contrast. The customer has not yet decided on a color for
> this.
>
> If anybody would like to design Celtic Knots or other interesting
symmetric
> designs that can repeat around a ring, I would be happy to pay for DXF
> files, or G-Code files. Payment could be in cash or a free ring of the
> style you designed. Please contact me off-list if you would like to
design
> some interesting patterns. Simple geometric patterns are not needed. I
am
> most interested in stylized Celtic Knots.
>
> I use cutters from 1/32" down to 0.010", but only one size cutter per
> design. The pattern should fit on a 6-8 mm wide ring.
>
> Thanks for all of your help in getting me setup with my equipment, and
your
> future help with designs.
>
> Daniel J. Statman, Statman Designs
> www.statmandesigns.com
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Dan Statman 2002-05-30 18:55:08 UTC Latest Design Created with my Sherline CNC afogassa 2002-05-30 19:39:09 UTC Re: Latest Design Created with my Sherline CNC John 2002-05-30 19:44:45 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC JanRwl@A... 2002-05-30 20:21:54 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 03:48:56 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 03:49:56 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC RC 2002-05-31 05:03:29 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 05:35:00 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC William Scalione 2002-05-31 09:30:16 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 09:49:32 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Larry Van Duyn 2002-06-04 06:04:42 UTC servo motors