CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC

Posted by Dan Statman
on 2002-05-31 05:35:00 UTC
Yes, I am using Sherline's rotary table. For software, I draw a single
unit of the pattern in Vector and generate the G-Code for that
pattern. I then take the G-Code and copy it to a spreadsheet (Excel).
From th spreadsheet, I can extract relevant X and Y data points which
can then be scaled and repeated using simple mathematical manipulations
of the data. Once I have all of the pattern created on a 360 degree
rotational axis, I have another macro that creates G-Code directly in
Microsoft Word from the Excel spreadsheet. Takes about 5 minutes after
Vector creates the initial G-Code.

It takes so long to engrave since I am using a 0.015" endmill spinning
at a relatively slow 10,200 RPM while trying to cut grade-5 titanium.
In order to acheive the depth of cut the pattern is repeated three
times. I set the feed rate to 0.5 IPM, but since it is on a rotary
table the exact speed is unknown. Given the short interval between
segments, I do not think the machine ever reaches the full speed
setting anyway since it is accelerating and decelerating all of the
time. I am not in the least bit concerned with the speed of cutting,
since I have plenty of handwork that I do on other projects while these
are being cut.

Dan.


----- Original Message -----
From: "RC" <asdf@...>
Date: Friday, May 31, 2002 11:31 am
Subject: Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline
CNC

> Very nice work! I do have a few questions, are you using
> Sherline's rotary
> with conjuntion with you mill, and what are you using to for
> software? I
> was also wondering why it take so long to engrave the ring, and
> what feed
> rate you were using? material used?
>
> RC

Discussion Thread

Dan Statman 2002-05-30 18:55:08 UTC Latest Design Created with my Sherline CNC afogassa 2002-05-30 19:39:09 UTC Re: Latest Design Created with my Sherline CNC John 2002-05-30 19:44:45 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC JanRwl@A... 2002-05-30 20:21:54 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 03:48:56 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 03:49:56 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC RC 2002-05-31 05:03:29 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 05:35:00 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC William Scalione 2002-05-31 09:30:16 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Dan Statman 2002-05-31 09:49:32 UTC Re: [CAD_CAM_EDM_DRO] Latest Design Created with my Sherline CNC Larry Van Duyn 2002-06-04 06:04:42 UTC servo motors