CAD CAM EDM DRO - Yahoo Group Archive

Re: DRO boards

Posted by Dan Mauch
on 1999-05-29 06:56:54 UTC
Yes .I will need to get a cost but the assembly cost should not be over $15.
Dan
-----Original Message-----
From: Brian Fairey <bfairey@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Friday, May 28, 1999 6:08 PM
Subject: Re: [CAD_CAM_EDM_DRO] DRO boards


>From: Brian Fairey <bfairey@...>
>
>Dan, next question, have you found someone to populate the boards?
>Brian.
>
>Dan Mauch wrote:
>
>> From: "Dan Mauch" <dmauch@...>
>>
>> I have placed the order for a batch of Printed circuit boards for
the -2/4
>> axis DRO boards. I should have them in 21 days. The quoted price per
board
>> plus the $200 tooling charge makes each board cost ~$15-$16 each. Not
bad.
>> It should make the assembly really easy.
>> In any case I have a list of those that have ordered boards. They will
have
>> first shot at them. Right now I have 35 boards on order which gives a few
>> spares.
>> Tom Kulaga gets a free board for coming up with the concept, the
>> software and the schematic.
>> Dan
>> -----Original Message-----
>> From: Buchanan, James (Jim) <jambuch@...>
>> To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
>> Date: Wednesday, May 26, 1999 6:08 PM
>> Subject: Re: [CAD_CAM_EDM_DRO] DRO boards
>>
>> >From: "Buchanan, James (Jim)" <jambuch@...>
>> >
>> >Tom:
>> >
>> >I am just new to the list so I missed out on some earlier discussion of
>> >your DRO project. I scanned your WEB page, I think it was yours, But I
>> >seemed to have missed what type of encoders you are using and or
>> >support. How about building your own using a type setter to make a film
>> >grid.
>> >
>> >Thanks
>> >--
>> >James Buchanan
>> >Lexington, Kentucky (The Blue Grass State) USA
>> >Two Truck Climax Locomotive Operator & Builder
>> >
>> >------------------------------------------------------------------------
>> >ONElist: where real people with real interests get connected.
>> >http://www.onelist.com
>> >Join a new list today!
>> >------------------------------------------------------------------------
>> >welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
>> discussion of shop built systems in the above catagories.
>> >
>>
>> ------------------------------------------------------------------------
>> Congratulations to "M-K-ROSES," our latest ONElist of the Week.
>> http://www.onelist.com
>> Visit our homepage and share with us how ONElist is changing YOUR life!
>> ------------------------------------------------------------------------
>> welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>
>
>------------------------------------------------------------------------
>Campaign 2000 is here!
>http://www.onelist.com
>Discuss your thoughts; get informed at ONElist. See our homepage.
>------------------------------------------------------------------------
>welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
discussion of shop built systems in the above catagories.
>

Discussion Thread

Tom Kulaga 1999-05-25 19:44:48 UTC Re: DRO boards Dan Mauch 1999-05-25 19:47:11 UTC Re: DRO boards Buchanan, James (Jim) 1999-05-26 17:55:15 UTC Re: DRO boards Dan Mauch 1999-05-26 21:38:00 UTC Re: DRO boards Dan Mauch 1999-05-28 06:23:42 UTC Re: DRO boards Brian Fairey 1999-05-28 16:37:50 UTC Re: DRO boards john@x... 1999-05-28 16:04:04 UTC Re: DRO boards Dan Mauch 1999-05-29 06:56:54 UTC Re: DRO boards Tom Kulaga 1999-05-29 10:37:53 UTC Re: DRO boards Tom Kulaga 1999-05-29 10:37:59 UTC Re: DRO boards Tom Kulaga 1999-05-29 10:38:05 UTC Re: DRO boards Tim Goldstein 1999-05-29 15:19:46 UTC Re: DRO boards Mark Fraser 1999-05-29 18:30:03 UTC Re: DRO boards Jon Elson 1999-05-29 21:43:42 UTC Re: DRO boards Dan Mauch 1999-05-30 05:21:54 UTC Re: DRO boards Dan Mauch 1999-05-30 05:49:59 UTC Re: DRO boards Mark Fraser 1999-05-30 08:08:24 UTC Re: DRO boards