Re: DRO boards

Didn't arrive in my mailbox, can someone please forward it to me /
thanks / mark


Dan Mauch wrote:

> From: "Dan Mauch" <dmauch@...>
>
> It requires just a few parts . See Tom Kulaga's discussion earlier today
> about other parts required.
> Dan
> -----Original Message-----
> From: Mark Fraser <mfraser@...>
> To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
> Date: Saturday, May 29, 1999 6:41 PM
> Subject: Re: [CAD_CAM_EDM_DRO] DRO boards
>
> >From: Mark Fraser <mfraser@...>
> >
> >So, I missed the earlier discussion on this item - what else will I need to
> >a) populate the board, and
> >b) drive it?
> >
> >(a pointer is fine, thanks) / mark
> >
> >
> >Dan Mauch wrote:
> >
> >> From: "Dan Mauch" <dmauch@...>
> >>
> >> I use the US Digital linear encoder strips mounted in a 1X2 rectangular
> tube
> >> the length of the strip. I use a tube as a pushrod and as the conduit for
> >> the encoder cables. Works slick.
> >> I will be ordering board tomorro. Better let me know if you want a board.
> >> Dan
> >> -----Original Message-----
> >> From: Buchanan, James (Jim) <jambuch@...>
> >> To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
> >> Date: Wednesday, May 26, 1999 6:08 PM
> >> Subject: Re: [CAD_CAM_EDM_DRO] DRO boards
> >>
> >> >From: "Buchanan, James (Jim)" <jambuch@...>
> >> >
> >> >Tom:
> >> >
> >> >I am just new to the list so I missed out on some earlier discussion of
> >> >your DRO project. I scanned your WEB page, I think it was yours, But I
> >> >seemed to have missed what type of encoders you are using and or
> >> >support. How about building your own using a type setter to make a film
> >> >grid.
> >> >
> >> >Thanks
> >> >--
> >> >James Buchanan
> >> >Lexington, Kentucky (The Blue Grass State) USA
> >> >Two Truck Climax Locomotive Operator & Builder
> >> >
> >> >------------------------------------------------------------------------
> >> >ONElist: where real people with real interests get connected.
> >> >http://www.onelist.com
> >> >Join a new list today!
> >> >------------------------------------------------------------------------
> >> >welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
> >> discussion of shop built systems in the above catagories.
> >> >
> >>
> >> ------------------------------------------------------------------------
> >> ONElist: where the world talks!
> >> http://www.onelist.com
> >> Join a new list today.
> >> ------------------------------------------------------------------------
> >> welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
> discussion of shop built systems in the above catagories.
> >
> >
> >------------------------------------------------------------------------
> >It's finally here! What's your opinion?
> >http://www.onelist.com
> >Create a Star Wars discussion group at ONElist.
> >------------------------------------------------------------------------
> >welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the
> discussion of shop built systems in the above catagories.
> >
>
> ------------------------------------------------------------------------
> Campaign 2000 is here!
> http://www.onelist.com
> Discuss your thoughts; get informed at ONElist. See our homepage.
> ------------------------------------------------------------------------
> welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the discussion of shop built systems in the above catagories.