Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Posted by
Marcus & Eva
on 2002-06-09 08:20:14 UTC
Ahh Hoyt:
I won't argue that distillation is ineffective in removing ions from
solution; of course it does!
But every commercial manufacturer of wire EDM's that I know of uses a
deionizing bed rather than a still to get the water quality they need.
This tells me that distilling does not work adequately for the volumes that
are needed for commercial applications, and I suspect that the corrosiveness
of steam on metallic condensers is at least part of the source of the
problem.
Thoughput, temperature control, and cost, are probably the other big
factors.
My main point is that with water based systems, you need the capability to
scrub large volumes quickly and very thoroughly.
Oil is much more forgiving in this regard.
Cheers
Marcus
I won't argue that distillation is ineffective in removing ions from
solution; of course it does!
But every commercial manufacturer of wire EDM's that I know of uses a
deionizing bed rather than a still to get the water quality they need.
This tells me that distilling does not work adequately for the volumes that
are needed for commercial applications, and I suspect that the corrosiveness
of steam on metallic condensers is at least part of the source of the
problem.
Thoughput, temperature control, and cost, are probably the other big
factors.
My main point is that with water based systems, you need the capability to
scrub large volumes quickly and very thoroughly.
Oil is much more forgiving in this regard.
Cheers
Marcus
----- Original Message -----
From: <bjammin@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, June 09, 2002 6:33 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
> At 06:43 AM 6/9/02 +0000, you wrote:
> >It depends on how the distillation is done, and what condition the
> >still is in. If the water in the boiler is boiling rapidly, particles of
> >dirty water or scale can be blown into the condenser.
>
> Nit-picking, dude; any process depends on the condition of the gear used.
> You could certainly have badly de-ionized water too. My point should have
> been clear, and it still stands.
>
> Regards, Hoyt
>
>
> Anti-virus request: Please do not add this email addy to address books
> Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
> US Best MC - http://www.freeyellow.com/members/batwings/best.html
> Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
> Trust the crowing of the cock but not the tolling of the clock
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
Discussion Thread
nussfr2
2002-06-07 13:16:54 UTC
Deskam2000 entry/exit
High Tech
2002-06-07 13:59:33 UTC
EDM Fluid
nussfr2
2002-06-07 14:17:24 UTC
Re: Deskam2000 entry/exit
Ian W. Wright
2002-06-08 03:36:19 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
chevalier121
2002-06-08 05:54:07 UTC
Re: EDM Fluid
bjammin@i...
2002-06-08 06:18:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Marcus & Eva
2002-06-08 10:26:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
RichD
2002-06-08 16:27:18 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
bjammin@i...
2002-06-08 19:13:54 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Jon Elson
2002-06-08 23:26:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Ian W. Wright
2002-06-09 02:51:07 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
bjammin@i...
2002-06-09 03:55:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Marcus & Eva
2002-06-09 08:08:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Marcus & Eva
2002-06-09 08:20:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Jon Elson
2002-06-09 14:10:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
bjammin@i...
2002-06-10 05:06:32 UTC
EDM Fluid
bjammin@i...
2002-06-10 05:06:34 UTC
EDM Fluid
turbulatordude
2002-06-10 05:40:12 UTC
Re: EDM Fluid
John
2002-06-10 07:49:22 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
John
2002-06-10 08:05:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
Marcus & Eva
2002-06-10 08:47:01 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
Jon Elson
2002-06-10 09:39:57 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
JanRwl@A...
2002-06-10 11:18:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM Fluid
bjammin@i...
2002-06-11 04:47:09 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
bjammin@i...
2002-06-11 04:47:28 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid
John
2002-06-11 05:36:30 UTC
Re: [CAD_CAM_EDM_DRO] EDM Fluid