Re: mill

you don't have to replace the whole unit, just the inserts.
Darrell

----- Original Message -----
From: Steve Carlisle <quatsein@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Thursday, January 13, 2000 6:40 PM
Subject: Re: [CAD_CAM_EDM_DRO] mill


> From: "Steve Carlisle" <quatsein@...>
>
> Well, the old style heater could be upgraded to the
> newer style automatic breakers, like the ones made
> by Klockner-Moeller. I have used this type and they
> are great, with a large current adjust range and auto or
> manual settings, and fairly small.
>
> Steve
>
> ----------
> From: Darrell <dgehlsen@...>
> To: CAD_CAM_EDM_DRO@onelist.com
> Subject: Re: [CAD_CAM_EDM_DRO] mill
> Date: Thursday, January 13, 2000 10:40 AM
>
> From: "Darrell" <dgehlsen@...>
>
> Al,
> The Bridgeport Spindle Motor and the power transformers in the main power
> cabinet can be changed from 415 volt to 210 volt by changing the jumpers
on
> the transformers and changing the wire connections on the motor.
> There should be an information plate either on the transformer or on the
> door of the power cabinet. The only difference between that machine and
> mine
> might be the spindle motor because of the 50 cycle / 60 cycle difference
> here in the USA.
> The one other thing that you will have to change are the "heaters" in the
> motor overload in the power cabinet. They are different for the 210 volts
> and you can get them from Bridgeport. The part number should be listed on
> the door of the power cabinet. I think the number for 210 volt is 2437 and
> a
> 2435 should work.
> Darrell
>
> ----- Original Message -----
> From: Al Schoepp <a_schoep@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: Thursday, January 13, 2000 10:12 AM
> Subject: Re: [CAD_CAM_EDM_DRO] mill
>
>
> > From: Al Schoepp <a_schoep@...>
> >
> > oops, forgot the info the mill I was asking about
> >
> > Bridge Port Series II, Interact 4 milling machine (made in UK). 415
> > volt, 3 phase, 50 Hz, full load current 25, spindle motor current 22,
> > control voltage 110, fuse interupt cap 20. Unit measures approx 6' L x
> > 4' W x 7' H. Includes video display control and light on swing arm. Item
> > was serviceable, may not be complete.
> >
> > Al Schoepp wrote:
> > >
> > > From: Al Schoepp <a_schoep@...>
> > >
> > > I've been looking for a milling machine for a home shop for a while.
I
> > > just found this going up for auction (military surplus). I realize it
> > > is way overkill for a home shop but if I could get it for the right
> > > price... I looked for some info on the machine on the web with no
luck,
> > > does anyone here have any info on it, or thoughts about it's
usefulness
> > > in a small shop. If it's possible to convert to 220v or run 415v in
> the
> > > home.
> > >
> > > Al
> > >
> > > --------------------------- ONElist Sponsor
> ----------------------------
> > >
> > > GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
> > > Tired of filling out forms and remembering passwords? Gator fills in
> > > forms and passwords with just one click! Comes with $50 in free
> coupons!
> > > <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>
> > >
> > >
> ------------------------------------------------------------------------
> > >
> > > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> > > To Unsubscribe, read archives, change to or from digest.
> > > Go to: http://www.onelist.com/isregistered.cgi
> > > Log on, and you will go to Member Center, and you can make changes
> there.
> > > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > > bill,
> > > List Manager
> >
> > --------------------------- ONElist Sponsor ----------------------------
> >
> > Get great offers on top-notch products that match your interests!
> > Sign up for eLerts at:
> > <a href=" http://clickme.onelist.com/ad/elerts1 ">Click Here</a>
> >
> > ------------------------------------------------------------------------
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> > To Unsubscribe, read archives, change to or from digest.
> > Go to: http://www.onelist.com/isregistered.cgi
> > Log on, and you will go to Member Center, and you can make changes
there.
> > For the FAQ, go to http://www.ktmarketing.com/faq.html
> > bill,
> > List Manager
> >
>
>
> --------------------------- ONElist Sponsor ----------------------------
>
> Want to send money instantly to anyone, anywhere, anytime?
> You can today at X.com - and we'll give you $20 to try it. Sign
> up today at X.com. It's quick, free, & there's no obligation.
> <a href=" http://clickme.onelist.com/ad/xcom ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
> discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
> Tired of filling out forms and remembering passwords? Gator fills in
> forms and passwords with just one click! Comes with $50 in free coupons!
> <a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>