CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] CNC Lathe spindle motor replacement control board

Posted by RichD
on 2002-06-17 11:54:16 UTC
Dan,
You describe the KB Electronics controllers almost to a T.
You will have to check on availability of the tach feed back type, tho.
They have a good web site: http://www.kbelectronics.com/
Surplus Center was selling a large KB unit with their treadmill motors.
A real killer controller.
RichD

Dan Mauch wrote:
>
> Any suggested source for a good quality low cost 90VDC speed controller?
> My spindle motor specs are:
> 90VDC 5A continuous PM motor with tach @ 7V per 1K RPM
> 60A peak.
> Must use a speed control pot for local operation
> Must have a tach feedback for 7V/1K RPM and with good response time for
> threading operations.
> PWM output at least 16Khz
> I would also like to have it so I can use an analog signal of +10 for
> program speed control.
> Dan
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

--
~ ~~ ~ ~ ~~ ~~____~,~~ ~~~~
\------/ |00|_[]_[]__||0 Tenwheeler
.|_CMRy_|-|__|________|_|, <<<Under construction
__________''oo__oo__---"0=0=0"=o[]o\\___________________________
-=Rich=-=Colorado Midland Railway=-=cmsteam@...=-
-------See my web site: <http://cmsteamer.homestead.com/> ------

Discussion Thread

P. J. Hicks 2001-10-09 10:14:31 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1685 ccs@m... 2001-10-09 10:31:43 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1685 Smoke 2001-10-09 10:37:21 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1685 Rich D. 2001-10-09 10:37:56 UTC Re: [CAD_CAM_EDM_DRO] Digest Number 1685 Carol & Jerry Jankura 2001-10-09 12:26:53 UTC RE: [CAD_CAM_EDM_DRO] Digest Number 1685 Dan Mauch 2002-06-17 09:36:02 UTC CNC Lathe spindle motor replacement control board mariss92705 2002-06-17 11:47:29 UTC Re: CNC Lathe spindle motor replacement control board RichD 2002-06-17 11:54:16 UTC Re: [CAD_CAM_EDM_DRO] CNC Lathe spindle motor replacement control board Alan Marconett KM6VV 2002-06-17 12:20:25 UTC Re: [CAD_CAM_EDM_DRO] CNC Lathe spindle motor replacement control board