Re: toothed sprocket set screw

Thanks to all those who replied. These set screws are on
steppers that are from the late 70's, and they were from
IBM machines.

Steve

----------
From: Jon Elson <jmelson@...>
To: CAD_CAM_EDM_DRO@onelist.com
Subject: Re: [CAD_CAM_EDM_DRO] toothed sprocket set screw
Date: Saturday, January 15, 2000 9:51 PM

From: Jon Elson <jmelson@...>



Steve Carlisle wrote:

> From: "Steve Carlisle" <quatsein@...>
>
> I have some surplus stepper motors with toothed pulleys
> that have set screws with an internal spline, no not Torx.
> would anyone know of a supplier for wrench's for this type
> of set screw? Thanks,

Those sound like Bristol spline setscrews, from the 1940's
and 50's. I think Xcelite has a set, you could look in any
Newark, Allied, etc. catalog.

Jon


--------------------------- ONElist Sponsor ----------------------------

GRAB THE GATOR! FREE SOFTWARE DOES ALL THE TYPING FOR YOU!
Tired of filling out forms and remembering passwords? Gator fills in
forms and passwords with just one click! Comes with $50 in free coupons!
<a href=" http://clickme.onelist.com/ad/gator4 ">Click Here</a>

------------------------------------------------------------------------

Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
To Unsubscribe, read archives, change to or from digest.
Go to: http://www.onelist.com/isregistered.cgi
Log on, and you will go to Member Center, and you can make changes there.
For the FAQ, go to http://www.ktmarketing.com/faq.html
bill,
List Manager