Re: [CAD_CAM_EDM_DRO] Lathe threading
Posted by
glee@i...
on 2002-06-28 15:25:15 UTC
Doug, AHHA supports Lathe Threading. I recommend Bill Griffin
(www.grifftek.com) as he can sell you the controller and assist you with
the retrofit.
Dolphin CAD/CAM (Mentioned often on this list) has a lathe module that
supports threading. I have not yet tried thise so I am unable to speak for
the features.
I hope this helps. Good luck.
-Eric
"Doug
Harrison" To: <CAD_CAM_EDM_DRO@yahoogroups.com>
<prototype@cha cc:
rter.net> Fax to:
Subject: [CAD_CAM_EDM_DRO] Lathe threading
06/28/2002
02:38 PM
Please respond
to
CAD_CAM_EDM_DR
O
I just got home from Wisconsin with a Hardinge HNC lathe. The seller said
it came from a university and had less than 50 hours on it. It appears to
have less than 10 hours on it. All the tooling in the turret is from the
original purchase invoice and some have never cut anything. No wear marks
on the toolholder nuts. No stains on the lexan guards. The chip pan has no
scratches in the paint. The controller doesn't even have dust on the
cooling fans blades.
However, the controller is a GE550 - a real dog even if it is like new.
Has anyone developed a step/direction lathe control program yet? None of
the software I am aware of has threading capabilities. The one possible
exception is Ahha, but nobody seems to know if their threading function
works.
Doug
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
(www.grifftek.com) as he can sell you the controller and assist you with
the retrofit.
Dolphin CAD/CAM (Mentioned often on this list) has a lathe module that
supports threading. I have not yet tried thise so I am unable to speak for
the features.
I hope this helps. Good luck.
-Eric
"Doug
Harrison" To: <CAD_CAM_EDM_DRO@yahoogroups.com>
<prototype@cha cc:
rter.net> Fax to:
Subject: [CAD_CAM_EDM_DRO] Lathe threading
06/28/2002
02:38 PM
Please respond
to
CAD_CAM_EDM_DR
O
I just got home from Wisconsin with a Hardinge HNC lathe. The seller said
it came from a university and had less than 50 hours on it. It appears to
have less than 10 hours on it. All the tooling in the turret is from the
original purchase invoice and some have never cut anything. No wear marks
on the toolholder nuts. No stains on the lexan guards. The chip pan has no
scratches in the paint. The controller doesn't even have dust on the
cooling fans blades.
However, the controller is a GE550 - a real dog even if it is like new.
Has anyone developed a step/direction lathe control program yet? None of
the software I am aware of has threading capabilities. The one possible
exception is Ahha, but nobody seems to know if their threading function
works.
Doug
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Andrew Werby
2000-09-08 12:55:20 UTC
Lathe threading
ballendo@y...
2000-09-08 14:18:04 UTC
Re:Lathe threading
ballendo@y...
2000-09-08 18:00:57 UTC
Re: Re:Lathe threading
machines@n...
2000-09-09 00:45:36 UTC
Re:Lathe threading
ballendo@y...
2000-09-09 19:22:41 UTC
Re:Re:Lathe threading
ballendo@y...
2000-09-09 21:24:23 UTC
Re: Re: Re:Lathe threading
Ken Jenkins
2000-09-11 09:06:17 UTC
Re: Lathe threading
Doug Harrison
2002-06-28 14:34:36 UTC
Lathe threading
mart_wid
2002-06-28 15:16:07 UTC
Re: Lathe threading
stevenson_engineers
2002-06-28 15:17:49 UTC
Re: Lathe threading
glee@i...
2002-06-28 15:25:15 UTC
Re: [CAD_CAM_EDM_DRO] Lathe threading
Doug Harrison
2002-06-28 15:59:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
Doug Harrison
2002-06-28 17:01:30 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
bjammin@i...
2002-06-30 06:07:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
stevenson_engineers
2002-06-30 07:54:51 UTC
Re: Lathe threading
bjammin@i...
2002-07-01 07:05:19 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
James Owens
2002-07-01 07:26:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
Dan Mauch
2002-07-01 09:20:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lathe threading
James Owens
2002-07-01 09:49:09 UTC
Re: [CAD_CAM_EDM_DRO] Re: Lathe threading
Dan Mauch
2002-07-01 11:32:10 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lathe threading
IMService
2002-07-01 15:40:38 UTC
Re: Re: Lathe threading
doug98105
2002-07-01 16:38:00 UTC
Re: Lathe threading
Dan Mauch
2002-07-02 06:30:43 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Lathe threading
Dan Mauch
2002-07-02 06:40:54 UTC
RE: [CAD_CAM_EDM_DRO] Re: Lathe threading
Dan Mauch
2002-07-02 08:47:43 UTC
CCED Spam
Larry Ragan
2002-07-02 10:49:46 UTC
RE: [CAD_CAM_EDM_DRO] Lathe threading
Doug Harrison
2002-07-02 11:11:06 UTC
Re: [CAD_CAM_EDM_DRO] Lathe threading
j.guenther
2002-07-02 11:17:36 UTC
RE: [CAD_CAM_EDM_DRO] Lathe threading
bjammin@i...
2002-07-02 18:17:32 UTC
OT: Spam
bjammin@i...
2002-07-02 18:17:42 UTC
Re: [CAD_CAM_EDM_DRO] Lathe threading
Doug Harrison
2002-07-02 20:22:23 UTC
Re: [CAD_CAM_EDM_DRO] Lathe threading
bjammin@i...
2002-07-03 04:42:10 UTC
Microkinetics