Re: Minimum CPU needed for EMC TNG
Posted by
Ray Henry
on 2002-06-30 12:56:53 UTC
Ed
You will work freqmod a bit hard with this combination of input scale and max
velocity. (23k ppr) As for running TNG, I've got it on a 266 laptop, a
P2-400 and the Cyrix 800. There is a noticable difference in the rate of
refresh and the responsiveness of the 800.
Contact me off list if you want to go through the trouble that you are having
with the BDI.
HTH
Ray
You will work freqmod a bit hard with this combination of input scale and max
velocity. (23k ppr) As for running TNG, I've got it on a 266 laptop, a
P2-400 and the Cyrix 800. There is a noticable difference in the rate of
refresh and the responsiveness of the 800.
Contact me off list if you want to go through the trouble that you are having
with the BDI.
HTH
Ray
> From: Ed Fanta <atex57@...>
> Subject: Minimum CPU needed for EMC TNG
>
>
> I picked up a BDI a while back and have had nothing but trouble getting
> it to work, maybe a buggy version, probably lack of knowledge. I have
> been playing with RH 7.1 and like the setup better than the RH that
> comes on the BDI. The question is what is the CPU speed needed to run
> the TNG? I have an AMD K6III-400 running to Geckos on a Wells-Index
> mill. The mill is running at 20,000 steps per inch and 70+ inches per
> minute. Is the CPU fast enough? I will upgrade if needed. EMC seems to
> have everything I need. I really like the Yeager demo but no G41-42 so
> it is very limited for me. TIA. Ed.
Discussion Thread
Ed Fanta
2002-06-30 06:48:22 UTC
Minimum CPU needed for EMC TNG
stevenson_engineers
2002-06-30 08:43:20 UTC
Re: Minimum CPU needed for EMC TNG
Dan Mauch
2002-06-30 08:56:32 UTC
RE: [CAD_CAM_EDM_DRO] Minimum CPU needed for EMC TNG
Carol & Jerry Jankura
2002-06-30 10:05:52 UTC
RE: [CAD_CAM_EDM_DRO] Re: Minimum CPU needed for EMC TNG
Ray Henry
2002-06-30 12:56:53 UTC
Re: Minimum CPU needed for EMC TNG
Ed Fanta
2002-06-30 15:03:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum CPU needed for EMC TNG
Ed Fanta
2002-06-30 15:48:03 UTC
Re: [CAD_CAM_EDM_DRO] Minimum CPU needed for EMC TNG
Ed Fanta
2002-06-30 16:02:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum CPU needed for EMC TNG
dkowalcz2000
2002-06-30 21:45:33 UTC
Re: Minimum CPU needed for EMC TNG
bsptrades
2002-06-30 22:44:16 UTC
Re: Minimum CPU / insane speeds
Ed Fanta
2002-07-01 05:45:25 UTC
Re: [CAD_CAM_EDM_DRO] Re: Minimum CPU / insane speeds
Dan Mauch
2002-07-01 06:57:57 UTC
CNC Lathe threading
Brian Pitt
2002-07-01 10:16:39 UTC
Re: [CAD_CAM_EDM_DRO] CNC Lathe threading
Dan Mauch
2002-07-01 11:34:15 UTC
RE: [CAD_CAM_EDM_DRO] CNC Lathe threading