CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares)

Posted by Doug Harrison
on 2002-07-06 11:27:14 UTC
----- Original Message -----
From: Jon Elson <elson@...>
SNIP
>But, for final adjustment
> in the .001" range, I'm using bench stones! You oil the stone very
> thoroughly and just rub the stone back and forth on the ways. I take
> about 100 back and forth movements of 6 - 10" over all the high spots,
> then clean it and check it with a straightedge.
UNSNIP

There is a lapping attachment for a Biax scraper that gave me an idea. You
could epoxy a stone to a floating shoe that mounts on a Biax or even a
Sawzall. As long as the weight is minimal it should work well.

Doug

Discussion Thread

Les Watts 2002-07-05 06:03:44 UTC Creating long straight edges (and big squares) Marcus & Eva 2002-07-05 19:09:03 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Les Watts 2002-07-06 05:44:00 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) turbulatordude 2002-07-06 07:09:42 UTC Re: Creating long straight edges (and big squares) Jon Elson 2002-07-06 08:32:23 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Les Watts 2002-07-06 10:53:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges (and big squares) Doug Harrison 2002-07-06 11:27:14 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 15:00:21 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) cnc_4_me 2002-07-06 15:17:33 UTC Re: Creating long straight edges (and big squares) Doug Harrison 2002-07-06 18:04:18 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Marcus & Eva 2002-07-06 18:10:05 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) hllrsr@c... 2002-07-06 18:50:11 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Carlos Guillermo 2002-07-06 20:30:38 UTC RE: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:18:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:33:49 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:40:09 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares)