CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares)

Posted by hllrsr@c...
on 2002-07-06 18:50:11 UTC
Marcus,
If this is the guy from the north end of Cambridge, all you really need
to know is the following,

-he's good
-he's fast
-he can be as ignorant with you as all get out
- and he is EXTREMELY GOOD at what he does!

I had him redo the ways on a Keilinghaus (sp?) spinning lathe.
4 day turn around, and it came back with a better tolerance than it had
leaving the factory.

There is also a company in Stroud that does it, but I have never dealt
with them.

HTH
Iain


Marcus & Eva wrote:
>
> Hi Jon:
> You have my undying admiration for your willingness to dive into such a
> BIG job.
> I was thinking of trying to stone my machine as well (my ways are worn
> 0.0025").
> I gave it a 15 minute workout and couldn't measure the difference.
> That's when I got on the net and found a way grinder in Ontario who has
> EXCELLENT references, and wants only $850.00 CDN for the job.
> He's an older German gentleman who claims not to really NEED to do much in
> the way of work anymore, so he just does the jobs he likes.
> He has 2 big Churchill way grinders, and his customers tell me he gets them
> dead nuts...within tenths over 10 feet!!!
> I'm sending my Monarch 10EE over in a couple of weeks or so.
> I'll let everyone know how it works out.
> Cheers
>
> Marcus

Discussion Thread

Les Watts 2002-07-05 06:03:44 UTC Creating long straight edges (and big squares) Marcus & Eva 2002-07-05 19:09:03 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Les Watts 2002-07-06 05:44:00 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) turbulatordude 2002-07-06 07:09:42 UTC Re: Creating long straight edges (and big squares) Jon Elson 2002-07-06 08:32:23 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Les Watts 2002-07-06 10:53:26 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges (and big squares) Doug Harrison 2002-07-06 11:27:14 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 15:00:21 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) cnc_4_me 2002-07-06 15:17:33 UTC Re: Creating long straight edges (and big squares) Doug Harrison 2002-07-06 18:04:18 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Marcus & Eva 2002-07-06 18:10:05 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) hllrsr@c... 2002-07-06 18:50:11 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Carlos Guillermo 2002-07-06 20:30:38 UTC RE: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:18:21 UTC Re: [CAD_CAM_EDM_DRO] Re: Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:33:49 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares) Jon Elson 2002-07-06 21:40:09 UTC Re: [CAD_CAM_EDM_DRO] Creating long straight edges (and big squares)