CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] PIC-Servo

Posted by andrew abken
on 2002-07-09 18:17:03 UTC
>sounds like a nice setup
>I'm curious ,can the Pic-servo module be connected to both step/dir
>and serial in a way that would let you change input modes on the fly?
>as in serial commands for rapids and S/D for feed moves maybe
>

Hi brian

Sounds like it could work. Step and direction input does not change the
position register value inside the pic-servo, so the position value returned
by the pic-servo module, to the pc, would not be correct, but as long as the
software kept track of things you would be ok. I think. Need to consider
that one for a bit.


Thanks,
andrew-kn6za




_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com

Discussion Thread

babinda01 2002-07-08 05:10:47 UTC PIC-Servo Christopher Morse 2002-07-08 17:30:48 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo andrew abken 2002-07-08 20:43:53 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo Brian Pitt 2002-07-08 21:23:00 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo Ray Henry 2002-07-09 07:03:41 UTC Re: Re: PIC-Servo Jon Elson 2002-07-09 10:25:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo dumbdrive 2002-07-09 13:59:04 UTC Re: PIC-Servo Joll503@A... 2002-07-09 16:00:50 UTC Re: [CAD_CAM_EDM_DRO] Re: PIC-Servo Christopher Morse 2002-07-09 17:31:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo dumbdrive 2002-07-09 17:45:35 UTC Re: PIC-Servo andrew abken 2002-07-09 18:17:03 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo andrew abken 2002-07-09 18:18:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo andrew abken 2002-07-09 18:21:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo andrew abken 2002-07-09 18:49:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:45:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:49:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:56:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo