CAD CAM EDM DRO - Yahoo Group Archive

Re: Re: PIC-Servo

Posted by Ray Henry
on 2002-07-09 07:03:41 UTC
Andrew

What sort of "direct command control of servos" are you thinking of?

Ray


>    From: "andrew abken" <kn6za@...>
<s>
>    I would trash this system If I could find a way to run emc with direct
> command control of servos, and do it on a hobby budget. I think some folks
> are very close to comming up with just such a system, but until then Ill
> keep making chips fly with pic-servos.

Discussion Thread

babinda01 2002-07-08 05:10:47 UTC PIC-Servo Christopher Morse 2002-07-08 17:30:48 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo andrew abken 2002-07-08 20:43:53 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo Brian Pitt 2002-07-08 21:23:00 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo Ray Henry 2002-07-09 07:03:41 UTC Re: Re: PIC-Servo Jon Elson 2002-07-09 10:25:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo dumbdrive 2002-07-09 13:59:04 UTC Re: PIC-Servo Joll503@A... 2002-07-09 16:00:50 UTC Re: [CAD_CAM_EDM_DRO] Re: PIC-Servo Christopher Morse 2002-07-09 17:31:33 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo dumbdrive 2002-07-09 17:45:35 UTC Re: PIC-Servo andrew abken 2002-07-09 18:17:03 UTC Re: [CAD_CAM_EDM_DRO] PIC-Servo andrew abken 2002-07-09 18:18:32 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo andrew abken 2002-07-09 18:21:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo andrew abken 2002-07-09 18:49:51 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:45:04 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:49:09 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo Jon Elson 2002-07-10 09:56:35 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: PIC-Servo