Re: [CAD_CAM_EDM_DRO] Direction follower ?

Hi, well my years of cutting glass tell me if you spin the wheel with
pressure on it you probably will break the glass or make a star crack. to
make square edges you must lift,orientate,start the new cut before the old
cut line to make a clean break reliably. good luck brian f.

----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, July 17, 2002 9:56 PM
Subject: [CAD_CAM_EDM_DRO] Direction follower ?


> Hi all,
>
> I am still toying with cutting glass and found that a weighted
> standard glass cutter will cut glass easily enough.
>
> the problem is turning the cutter so it is always facing the
> direction of cut. This is similar to knife cutting vynal, but it
> appears to me that the action would have to be pretty accurate in
> angling in the direction of cut so as to score the glass cleanly.
>
> Any ideas on how best to do this ?
>
> Dave
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>