Re: [CAD_CAM_EDM_DRO] Re: Direction follower ?

Ok, maybe you should try a diamond point spring loaded for patterns, might
work just fine. i used a diamond point instead of a wheel for a lot of work
because i had it and the diamond wheel to sharpen it.(lapidary machines i
used to have). contact me off list ka1bbg@... for more rant on the
subject. cul brian f.

----- Original Message -----
From: "turbulatordude" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, July 18, 2002 4:08 PM
Subject: [CAD_CAM_EDM_DRO] Re: Direction follower ?


> Hi Brian,
>
> Thanks,
>
> I too know that you cannot cut rectangles without lifting the cutter.
>
> But, my intention is to cut patterns. curves and such.
> So, just as you could curve your cutter when you cut by hand, the
> cutter should rotate to always be aligned to the direction of cut.
>
> Dave
>
>
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "Brian" <ka1bbg@w...> wrote:
> > Hi, well my years of cutting glass tell me if you spin the wheel
> with
> > pressure on it you probably will break the glass or make a star
> crack. to
> > make square edges you must lift,orientate,start the new cut before
> the old
> > cut line to make a clean break reliably. good luck brian f.
> > ----- Original Message -----
> > From: "turbulatordude" <davemucha@j...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Wednesday, July 17, 2002 9:56 PM
> > Subject: [CAD_CAM_EDM_DRO] Direction follower ?
> >
> >
> > > Hi all,
> > >
> > > I am still toying with cutting glass and found that a weighted
> > > standard glass cutter will cut glass easily enough.
> > >
> > > the problem is turning the cutter so it is always facing the
> > > direction of cut. This is similar to knife cutting vynal, but it
> > > appears to me that the action would have to be pretty accurate in
> > > angling in the direction of cut so as to score the glass cleanly.
> > >
> > > Any ideas on how best to do this ?
> > >
> > > Dave
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > OFF Topic POSTS: General Machining
> > > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it if
> > you have trouble.
> > > http://www.metalworking.com/news_servers.html
> > >
> > > http://groups.yahoo.com/group/jobshophomeshop I consider this
> as a
> > sister site to the CCED group, as many of the same members are
> there, for OT
> > subjects, that are not allowed on the CCED list.
> > >
> > >
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Mom
> > > List Owner
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>