MOGLICE help!
Posted by
santorelli333
on 2002-08-01 18:30:17 UTC
What kind of moglice should I use to replace the brass feed nuts on
my sherline(like seen in the "fun with moglice"folder in the photo
section.
And what kind of moglice would be suitable for using as a linear
bearing material(I have almost completed a cnc (moving gantry)
machine and was planing to use delrin for the gliders on the ways but
casting it sounds....better(larger surface area etc.(EASIER)
San
my sherline(like seen in the "fun with moglice"folder in the photo
section.
And what kind of moglice would be suitable for using as a linear
bearing material(I have almost completed a cnc (moving gantry)
machine and was planing to use delrin for the gliders on the ways but
casting it sounds....better(larger surface area etc.(EASIER)
San
Discussion Thread
santorelli333
2002-08-01 18:30:17 UTC
MOGLICE help!
passive_i
2002-08-02 12:33:55 UTC
Re: MOGLICE help!
James Owens
2002-08-02 13:56:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
Dave Hylands
2002-08-02 14:00:56 UTC
RE: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
Randy Gordon-Gilmore
2002-08-02 14:11:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
Randy Gordon-Gilmore
2002-08-02 14:21:02 UTC
RE: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
turbulatordude
2002-08-02 15:55:45 UTC
Re: MOGLICE help!
santorelli333
2002-08-02 17:36:24 UTC
Re: MOGLICE help!
Randy Gordon-Gilmore
2002-08-02 22:04:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
Randy Gordon-Gilmore
2002-08-02 22:11:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: MOGLICE help!
tauscnc
2002-08-03 07:54:13 UTC
Re: MOGLICE help!
Randy Gordon-Gilmore
2002-08-05 16:29:30 UTC
Re: MOGLICE help!