Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Posted by
Doug Harrison
on 2002-08-10 08:36:44 UTC
Single point tooling probably won't work for reasons others have already mentioned. What about an adjustable reamer of sorts
where the adjustment is controlled electronically? It might take some fiddling to get the adjusment feature right but at least it
would be self centering if your pilot hole was straight.
Doug
where the adjustment is controlled electronically? It might take some fiddling to get the adjusment feature right but at least it
would be self centering if your pilot hole was straight.
Doug
Discussion Thread
caerbr
2002-08-09 22:29:29 UTC
internal contouring with cnc
Marcus & Eva
2002-08-10 07:52:04 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Peter
2002-08-10 07:53:08 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Ian W. Wright
2002-08-10 07:58:46 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Doug Harrison
2002-08-10 08:36:44 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Bill Vance
2002-08-10 12:23:22 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Jon Elson
2002-08-10 13:40:58 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
kdoney_63021
2002-08-10 14:03:15 UTC
Re: internal contouring with cnc
doug98105
2002-08-10 14:58:01 UTC
Re: internal contouring with cnc
bjammin@i...
2002-08-11 04:11:42 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc
Brian
2002-08-12 06:59:04 UTC
Re: [CAD_CAM_EDM_DRO] internal contouring with cnc