CAD CAM EDM DRO - Yahoo Group Archive

Speed - Parallel vs serial ( was Re: Motor

on 2002-09-05 04:25:36 UTC
If I am correct, the proceedure is to put all negative motor wires on
the battery for the duration of the test.

toggle A+ on the battery. motor should twitch. GOOD.

hold A+ on the battery and now toggle B+ if it does not twitch, you
got a pair.

while holding A+ on the battery and all -'s, toggle C+ or D+ so you
would have one coil connected on the battery and testing the other
coils until you find another that does not twitch.

verify by testing the other coil pair.
ie: if A and C are found to be a pair. hold B+ and test with D+.

Dave

> > the volt meter. Now while holding the A- and A+ wires on the
> battery,
> > connect B+ to the + end of the battery. If you don't see a twitch,
> > you've gotten lucky and that's a pair of coils. If you do see a
> twitch,
>
> Hi J.J.
>
> Should the above read?
>
> > the volt meter. Now while holding the A- and A+ wires on the
> battery,
> > connect B+ to the + end of the battery AND B- TO THE - END OF THE
> BATTERY. If you don't see a twitch,
> > you've gotten lucky and that's a pair of coils. If you do see a
> twitch,
>
<snip>

Discussion Thread

Mike Snodgrass 2002-03-05 12:02:18 UTC Motor mariss92705 2002-03-05 17:36:17 UTC Re: Motor Gene 2002-07-13 19:24:04 UTC Motor mariss92705 2002-07-13 20:41:00 UTC Re: Motor turbulatordude 2002-09-03 07:02:55 UTC Speed - Parallel vs serial ( was Re: Motor Robert Campbell 2002-09-03 07:19:23 UTC Re: [CAD_CAM_EDM_DRO] Speed - Parallel vs serial ( was Re: Motor turbulatordude 2002-09-03 16:36:21 UTC Speed - Parallel vs serial ( was Re: Motor Bob Simon 2002-09-03 19:32:21 UTC Siemens drives in current mode Robert Campbell 2002-09-03 19:36:21 UTC Re: [CAD_CAM_EDM_DRO] Speed - Parallel vs serial ( was Re: Motor cadcamcenter 2002-09-03 21:41:06 UTC Speed - Parallel vs serial ( was Re: Motor cadcamcenter 2002-09-03 21:57:29 UTC Speed - Parallel vs serial ( was Re: Motor turbulatordude 2002-09-04 04:35:15 UTC 8 wire half or Serial ? ( was Speed - Parallel vs serial ( was Re: Motor mariss92705 2002-09-04 07:35:13 UTC 8 wire half or Serial ? ( was Speed - Parallel vs serial ( was Re: Motor turbulatordude 2002-09-04 11:01:43 UTC 8 wire half or Serial ? ( was Speed - Parallel vs serial ( was Re: Motor cadcamcenter 2002-09-04 17:07:47 UTC 8 wire half or Serial ? ( was Speed - Parallel vs serial ( was Re: Motor JJ 2002-09-04 17:35:24 UTC RE: [CAD_CAM_EDM_DRO] Speed - Parallel vs serial ( was Re: Motor cadcamcenter 2002-09-04 19:06:10 UTC Speed - Parallel vs serial ( was Re: Motor JJ 2002-09-05 04:12:04 UTC RE: [CAD_CAM_EDM_DRO] Speed - Parallel vs serial ( was Re: Motor turbulatordude 2002-09-05 04:25:36 UTC Speed - Parallel vs serial ( was Re: Motor