RE: [CAD_CAM_EDM_DRO] 5-Axis help
Posted by
Carol & Jerry Jankura
on 2002-09-17 06:25:37 UTC
Hi, Brian:
There are some G-Code interpreters aimed at the low cost market that handle
up to 8 axes - TurboCNC, for one - that don't cost an arm and a leg.
CAD/CAM programs, however, are a different matter. In one manner or another,
Isaiah will learn to write software. Either G-Code or a CAD/CAM program.
-- Jerry
|-----Original Message-----
|From: Brian [mailto:ka1bbg@...]
|Sent: Tuesday, September 17, 2002 7:40 AM
|To: CAD_CAM_EDM_DRO@yahoogroups.com
|Subject: Re: [CAD_CAM_EDM_DRO] 5-Axis help
|
|
|Hi, first you may want to price 5 axis softwear!!! The price of such may be
|way too expensive for the home shop guy..maybe 5 to 20 thousand
|dollars...and another thing making a 5 axis machine and being able to get
|repeatability might require some fancy machines..do the homework and
|estimate the cost before you start! good luck brian f.
There are some G-Code interpreters aimed at the low cost market that handle
up to 8 axes - TurboCNC, for one - that don't cost an arm and a leg.
CAD/CAM programs, however, are a different matter. In one manner or another,
Isaiah will learn to write software. Either G-Code or a CAD/CAM program.
-- Jerry
|-----Original Message-----
|From: Brian [mailto:ka1bbg@...]
|Sent: Tuesday, September 17, 2002 7:40 AM
|To: CAD_CAM_EDM_DRO@yahoogroups.com
|Subject: Re: [CAD_CAM_EDM_DRO] 5-Axis help
|
|
|Hi, first you may want to price 5 axis softwear!!! The price of such may be
|way too expensive for the home shop guy..maybe 5 to 20 thousand
|dollars...and another thing making a 5 axis machine and being able to get
|repeatability might require some fancy machines..do the homework and
|estimate the cost before you start! good luck brian f.
Discussion Thread
isaiah_bellais
2002-09-16 21:25:18 UTC
5-Axis help
Jon Elson
2002-09-16 21:59:53 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
BR
2002-09-16 22:28:27 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
Jon Elson
2002-09-16 23:00:16 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
Doug Fortune
2002-09-16 23:28:13 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
Brian
2002-09-17 05:51:20 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
isaiah_bellais
2002-09-17 05:59:35 UTC
Re: 5-Axis help
Carol & Jerry Jankura
2002-09-17 06:25:37 UTC
RE: [CAD_CAM_EDM_DRO] 5-Axis help
Peter
2002-09-17 06:29:33 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
bjammin@i...
2002-09-17 07:26:10 UTC
RE: [CAD_CAM_EDM_DRO] 5-Axis help
Marcus & Eva
2002-09-17 08:35:33 UTC
Re: [CAD_CAM_EDM_DRO] 5-Axis help
isaiah_bellais
2002-09-17 08:57:36 UTC
Re: 5-Axis help
allan_reinhard
2002-09-17 09:20:29 UTC
Re: 5-Axis help
Brian Punkar
2002-09-17 10:07:24 UTC
Re: 5-Axis help
Jon Elson
2002-09-17 10:24:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5-Axis help
CL
2002-09-17 11:48:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5-Axis help
Howard Bailey
2002-09-17 15:32:56 UTC
Re: [CAD_CAM_EDM_DRO] Re: 5-Axis help