Re: Re: HARDINGE HNC RETROFIT
Posted by
Mark
on 2002-09-23 15:22:12 UTC
--- In CAD_CAM_EDM_DRO@y..., Ray Henry <rehenry@u...> wrote:
Install CD from you for $30.00
overnight, I think the Backplotter is the cause of the problem.
narrow it down.
Mark
PS - I noticed the kernels with the RT patches are setup for a single
processor, am I correct in assuming the the RT kernels do not support
SMP.
>I don't know if you want to hear the answer. ;) I got the BDI-TNG
> Hi Mark
>
> My first question when asked about some "goofy" behavior on the
> part of an EMC is where'd you get it.
Install CD from you for $30.00
> That satisfied, my next question is how long has it been runningI was able to repeat the problem, both times the Backplotter was idle
> without interruption. My first suggestion if it has been up for
> quite a while is to shut down the EMC and restart and see if the
> behavior persists. The problem here would not be related to a
> EMCSH problem but is related to the SHMEM processes.
overnight, I think the Backplotter is the cause of the problem.
> In the 2+ rtlinux kernels this is a memory manager named mbuff.I'll see if the problem happens without the Backplot. Hopefully I can
> If you find that a message pops up regarding mbuff being busy,
> you can clean it out with a little program called mbuff_dealloc.
> This program is created by running make in the directory where the
> mbuff module source resides.
> The memory structure that you will be clearing out is named
> emcmotStruct.
>
narrow it down.
Mark
PS - I noticed the kernels with the RT patches are setup for a single
processor, am I correct in assuming the the RT kernels do not support
SMP.
Discussion Thread
evelle97530
2002-07-28 15:28:02 UTC
HARDINGE HNC RETROFIT
Douglas King
2002-09-17 15:01:25 UTC
HARDINGE HNC RETROFIT
Ray Henry
2002-09-17 17:18:15 UTC
Re: HARDINGE HNC RETROFIT
doug king
2002-09-17 17:33:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: HARDINGE HNC RETROFIT
robert gebel
2002-09-17 19:55:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: HARDINGE HNC RETROFIT
Ray Henry
2002-09-18 09:52:46 UTC
Re: Re: Re: HARDINGE HNC RETROFIT
Ray Henry
2002-09-18 09:52:47 UTC
Re: Re: Re: HARDINGE HNC RETROFIT
doug king
2002-09-18 10:04:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: HARDINGE HNC RETROFIT
Ray Henry
2002-09-18 11:05:29 UTC
Re: Re: Re: Re: Re: HARDINGE HNC RETROFIT
robert gebel
2002-09-18 17:16:18 UTC
HARDINGE HNC RETROFIT threading
Matt Shaver
2002-09-19 22:56:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: HARDINGE HNC RETROFIT
William Scalione
2002-09-20 07:51:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: HARDINGE HNC RETROFIT
Dave Kowalczyk
2002-09-20 13:27:39 UTC
Re: HARDINGE HNC RETROFIT threading
doug king
2002-09-20 15:19:36 UTC
Re: [CAD_CAM_EDM_DRO] Re: HARDINGE HNC RETROFIT threading
Jon Elson
2002-09-20 19:48:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: HARDINGE HNC RETROFIT threading
stevenson_engineers
2002-09-21 01:37:17 UTC
Re: HARDINGE HNC RETROFIT threading
Dave Kowalczyk
2002-09-21 10:50:47 UTC
Re: HARDINGE HNC RETROFIT threading
Ray Henry
2002-09-21 12:43:06 UTC
Re: Re: Re: Re: Re: HARDINGE HNC RETROFIT
Mark
2002-09-21 20:15:12 UTC
Re: Re: Re: HARDINGE HNC RETROFIT
Tim Goldstein
2002-09-21 20:26:48 UTC
EMC List, Was: HARDINGE HNC RETROFIT
Matt Shaver
2002-09-21 21:17:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: HARDINGE HNC RETROFIT
Ray Henry
2002-09-22 06:38:40 UTC
Re: Re: Re: Re: HARDINGE HNC RETROFIT
JJ
2002-09-22 09:52:12 UTC
RE: [CAD_CAM_EDM_DRO] Re: Re: Re: HARDINGE HNC RETROFIT
Mark
2002-09-23 15:22:12 UTC
Re: Re: HARDINGE HNC RETROFIT
Ray Henry
2002-09-24 08:51:02 UTC
Re: Re: Re: HARDINGE HNC RETROFIT
machinist24540
2002-09-28 20:44:58 UTC
Re: HARDINGE HNC RETROFIT
doug king
2002-10-18 11:24:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: Re: HARDINGE HNC RETROFIT
Dave Engvall
2002-10-25 08:33:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: HARDINGE HNC RETROFIT
Dave Engvall
2002-10-25 08:41:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: Re: HARDINGE HNC RETROFIT
Jon Elson
2002-10-25 10:47:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Re: Re: HARDINGE HNC RETROFIT