Re: [CAD_CAM_EDM_DRO] Question on power supply

"".12 volts

> divided by 24 is 0.5%
> ripple - pretty good! As has been mentioned before
> steppers and servos
> aren't fussed by a small amount of ripple voltage.""

how is the gecko going to like it though? thats my
concern. and this sint jim.its kayla. and i guess i
shouldnt have cut into this topic...oops


--- Peter <prenolds@...> wrote:

> Jim, you have 0.12 volts (i.e. 120millivolts (1000
> millivolts = 1 volt))
> of ripple on your output - the ripple is just a
> remnant of the ac power
> that comes out of the wall. This is perfectly
> reasonable and totally ok
> for a stepper or servo power supply. .12 volts
> divided by 24 is 0.5%
> ripple - pretty good! As has been mentioned before
> steppers and servos
> aren't fussed by a small amount of ripple voltage.
>
> Cheers, Peter
>
>
>
> dazedNconfused wrote:
>
> >CAN ANYONE TELL ME WHAT RIPPLE VOLTAGE I HAVE FROM
> >THESE SPECS?........."120mVp-p MAX"for 24Vdc??
> >--- Jim <johnsonsfinejewelry@...> wrote:
> >
> >>Thank you Alan for your suggestion I'll try that.
> >>Another thing with
> >>this power supply is that it has a +/- 10% ripple
> >>voltage. Should I
> >>be concerned with that or not?
> >>
> >>
> >>Addresses:
> >>FAQ: http://www.ktmarketing.com/faq.html
> >>FILES:
>
>>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >>
> >>OFF Topic POSTS: General Machining
> >>If you wish to post on unlimited OT subjects goto:
>
> >>aol://5863:126/rec.crafts.metalworking or go thru
> >>Google.com to reach it if you have trouble.
> >>http://www.metalworking.com/news_servers.html
> >>
> >>http://groups.yahoo.com/group/jobshophomeshop I
> >>consider this as a sister site to the CCED group,
> as
> >>many of the same members are there, for OT
> subjects,
> >>that are not allowed on the CCED list.
> >>
> >>NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> >>DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> >>ACCEPT THIS.....NO EXCEPTIONS........
> >>
> >>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >>Subscribe:
> >>CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >>Unsubscribe:
> >>CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >>List owner:
> CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> >>wanliker@...
> >>Moderator: jmelson@...
> >>timg@... [Moderator]
> >>URL to this group:
> >>http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >>bill,
> >>List Mom
> >>List Owner
> >>
> >>
> >>
> >>Your use of Yahoo! Groups is subject to
> >>http://docs.yahoo.com/info/terms/
> >>
> >>
> >
> >
> >__________________________________________________
> >Do you Yahoo!?
> >New DSL Internet Access from SBC & Yahoo!
> >http://sbc.yahoo.com
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> >OFF Topic POSTS: General Machining
> >If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> >http://www.metalworking.com/news_servers.html
> >
> >http://groups.yahoo.com/group/jobshophomeshop I
> consider this as a sister site to the CCED group, as
> many of the same members are there, for OT subjects,
> that are not allowed on the CCED list.
> >
> >NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
> >
> >Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@...
> >Moderator: jmelson@...
> timg@... [Moderator]
> >URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Mom
> >List Owner
> >
> >
> >
> >Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru
> Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I
> consider this as a sister site to the CCED group, as
> many of the same members are there, for OT subjects,
> that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC
> DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT
> ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe:
> CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe:
> CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com,
> wanliker@...
> Moderator: jmelson@...
> timg@... [Moderator]
> URL to this group:
> http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>

__________________________________________________
Do you Yahoo!?
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com